HEADLIGHT CLEANER SWITCH INSPECTION


  1. INSPECT HEADLIGHT CLEANER SWITCH ASSEMBLY

    A01ND75E06
    Text in Illustration
    *1

    Component without harness connected

    (Headlight Cleaner Switch Assembly)

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      2 (L) - 3 (B) Headlight cleaner switch on Below 1 Ω
      Headlight cleaner switch off 10 kΩ or higher

    2. Connect a positive (+) lead from the battery to terminal 1 (ILL+) and a negative (-) lead to terminal 4 (ILL-).

    3. Check that the headlight cleaner switch assembly illumination comes on.

      OK
      The headlight cleaner switch assembly illumination comes on.

      If the result is not as specified, replace the headlight cleaner switch assembly.