WASHER LEVEL WARNING SWITCH INSTALLATION


  1. INSTALL WASHER LEVEL WARNING SWITCH ASSEMBLY


    1. A01NECA

      Install the washer level warning switch assembly.

    2. Connect the connector.

    3. A01NEWX

      Connect the washer hose.

  2. ADD WASHER FLUID


    1. Add washer fluid to the washer jar.

  3. INSTALL FRONT FENDER LINER RH


    1. A01NGWQE01
      Text in Illustration
      *1 Grommet

      Install 3 new grommets and 6 screws.

    2. Install the 7 clips.

    3. A01NHGU

      Using a 4 mm hexagon wrench, install the front fender liner RH with the 4 hexagon screws.

    4. A01NDOJE01
      Text in Illustration
      *1 Correct
      *2 Incorrect

      Install the 2 pin hold clips.

      Note

      Insert the pin hold with the slot aligned vertically. Do not rotate the clip after inserting it. After installation, confirm that the slot is vertical.

  4. INSTALL FRONT WHEEL RH

    Torque:
    103 N*m  { 1050 kgf*cm, 76 ft.*lbf }