WASHER LEVEL WARNING SWITCH INSPECTION


  1. INSPECT LEVEL WARNING SWITCH ASSEMBLY

    Tech Tips

    The following check should be performed with the windshield washer motor and pump installed to the washer jar.


    1. Fill the washer jar with washer fluid.

    2. A01NCSQE01
      Text in Illustration
      *1

      Component without harness connected

      (Level Warning Switch Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 (S) - 2 (E) Fluid volume is more than 800 ml 10 kΩ or higher
      1 (S) - 2 (E) Fluid volume is less than 600 ml Below 1 Ω

      If the result is not as specified, replace the level warning switch assembly.