WASHER NOZZLE (for Rear Side) REMOVAL


  1. REMOVE UPPER BACK WINDOW PANEL TRIM


    1. A01NGB3E01
      Text in Illustration
      *1 2-piece Type Clip

      Disengage the 7 clips and 6 claws, and remove the upper back window panel trim.

      Tech Tips

      If any clips remain on the back door panel after the upper back window panel trim is removed, remove the clips and install them to the upper back window panel trim.

  2. REMOVE REAR SPOILER SUB-ASSEMBLY


    1. Disconnect each connector.

    2. A01NFME

      Remove the 2 hole plugs.

    3. Remove the 5 nuts.

    4. A01ND1K

      Disengage the clip and 2 pins to remove the rear spoiler sub-assembly.

    5. Remove the clip and 2 pins.

  3. REMOVE REAR WIPER ARM AND BLADE ASSEMBLY


    1. A01NF7D

      Remove the nut and the rear wiper arm and blade assembly.

  4. REMOVE REAR WIPER MOTOR GROMMET


    1. A01NGHL

      Remove the rear wiper motor grommet.

  5. REMOVE REAR WIPER MOTOR AND BRACKET ASSEMBLY


    1. A01NF83

      Disconnect the connector.

    2. Disengage the clamp.

    3. Remove the 3 bolts and the rear wiper motor and bracket assembly.

  6. REMOVE REAR WASHER NOZZLE


    1. A01NF91

      Disengage the 2 claws.

    2. A01NFFK

      Disconnect the washer hose and remove the rear washer nozzle.