WASHER NOZZLE (for Front Side) ADJUSTMENT


  1. REMOVE WASHER NOZZLE SUB-ASSEMBLY


    1. A01ND55E02
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, disengage the 2 claws and separate the washer nozzle sub-assembly as shown in the illustration.

      Note

      Be careful not to damage the windshield.

      Tech Tips

      Tape the screwdriver tip before use.

    2. A01ND7H

      Remove the washer nozzle sub-assembly from the washer hose.

      Note

      Washer nozzles cannot be reused.

  2. ADJUST WASHER NOZZLE SUB-ASSEMBLY


    1. Select a washer nozzle so that the contact area is within the standard. Replace the washer nozzle with the selected one.

      A01NGWXE01

  3. INSTALL WASHER NOZZLE SUB-ASSEMBLY


    1. A01ND7H

      Connect a new washer nozzle sub-assembly to the washer hose.

    2. A01NG0DE01

      Engage the 2 claws and install the washer nozzle sub-assembly as shown in the illustration.