WASHER NOZZLE (for Front Side) ON-VEHICLE INSPECTION


  1. INSPECT WASHER NOZZLE SUB-ASSEMBLY


    1. With the engine running, check the position that the washer fluid hits the windshield.

      Standard
      Washer fluid hits the windshield in the areas shown in the illustration.
      A01NF43E01
      Standard Clearance
      Area Measurement
      A 240 mm (9.449 in.)
      B 254 mm (10.00 in.)
      C 113 mm (4.449 in.)
      D 89 mm (3.504 in.)

      Tech Tips

      If the result is not as specified, replace the malfunctioning washer nozzle sub-assembly.