WIPER SWITCH INSTALLATION


  1. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY


    1. A01NCXX

      Engage the claw and install the windshield wiper switch assembly as shown in the illustration.

    2. Connect the connector.

  2. INSTALL STEERING COLUMN COVER


    1. A01NCRE

      Engage the 2 guides and the 4 clips as shown in the illustration.

    2. A01NGYB

      Engage the claw.

    3. A01NFVJ

      Engage the 2 claws to install the steering column cover.

      Note

      Do not damage the tilt and telescopic switch.

    4. Install the screw.

    5. A01NGW7

      Turn the steering wheel assembly to the left and install the screw as shown in the illustration.

    6. A01NCMX

      Turn the steering wheel assembly to the right and install the screw as shown in the illustration.

    7. Make sure that the cable has been disconnected from the battery terminal for at least 2 seconds before reconnecting the cable.

    8. Connect the cable to the negative (-) battery terminal with the front wheels facing straight ahead.

    9. Reset the auto tilt away function setting to the previous condition by changing the customize parameter Click here.

      Note

      When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. INSTALL REAR DECK FLOOR BOX


    1. A01NDSY

      Install the rear deck floor box with the 3 clips.