OUTER MIRROR CONTROL ECU INSTALLATION


  1. INSTALL OUTER MIRROR CONTROL ECU ASSEMBLY


    1. A01NGS7

      Install the outer mirror control ECU assembly with the 2 screws.

    2. Connect each connector.

  2. INSTALL FRONT DOOR INNER GLASS WEATHERSTRIP


    1. A01NES8

      Engage the 4 claws and install the front door inner glass weatherstrip as shown in the illustration.

  3. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY


    1. Install a new front door trim board retainer (green).

    2. A01NGMN

      Connect the front door lock remote control cable assembly and front door inside locking cable assembly.

    3. Connect each connector.

    4. A01ND88

      Engage the front door trim board sub-assembly with the 4 claws of the front door inner glass weatherstrip as shown in the illustration.

    5. A01NFFCE01
      Text in Illustration
      *1 Front Door Trim Board Retainer

      Engage the 10 clips, front door trim board retainer and install the front door trim board sub-assembly.

    6. Install the 3 screws.

      Torque:
      (A)
      3.5 N*m  { 36 kgf*cm, 31 in.*lbf }

  4. INSTALL NO. 1 FRONT DOOR STIFFENER CUSHION


    1. A01NCRL

      Install the No. 1 front door stiffener cushion with the screw.

  5. INSTALL COURTESY LIGHT ASSEMBLY


    1. Connect the connector.

    2. A01NCMHE01

      Engage the claw to install the courtesy light assembly.

  6. INSTALL DOOR ARMREST COVER


    1. A01NHCO

      Install the door armrest cover.

  7. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side)


    1. A01NHHO

      Connect the connector.

    2. Engage the 2 clips and 5 claws, and install the power window regulator master switch assembly with front door armrest base panel.

  8. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL


    1. A01NF52

      Connect the connector.

    2. Engage the 2 clips and 5 claws, and install the power window regulator switch assembly with front door armrest base panel.

  9. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG


    1. A01NG38

      Engage the 3 claws and install the front door inside handle bezel plug.