BACK DOOR SUPPORT DISPOSAL


  1. DISPOSE OF BACK DOOR STAY ASSEMBLY


    1. Secure the back door stay assembly horizontally in a vise with the piston rod pulled out.

    2. A01NEV7E06

      Wear safety glasses. Use a metal saw to slowly cut a groove between A and B shown in the illustration to release the gas.

      Area Measurement
      A-B 50 mm (1.97 in.)

      Note

      Although the gas inside the back door stay assembly is colorless, odorless and harmless, metal debris may scatter. Therefore, cover the back door stay assembly with a piece of cloth or other material.