POWER BACK DOOR MAIN SWITCH INSPECTION


  1. INSPECT POWER BACK DOOR MAIN SWITCH

    A01NEI8E01
    Text in Illustration
    *1

    Component without harness connected

    (Power Back Door Main Switch)

    1. Check the operation of the main switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Condition Specified Condition
        1 - 2 Power back door main switch pushed Below 1 Ω
        1 - 2 Power back door main switch not pushed 10 kΩ or higher

        If the result is not as specified, replace the switch.