BACK DOOR OPENER SWITCH INSPECTION


  1. INSPECT BACK DOOR OPENER SWITCH ASSEMBLY


    1. Check the operation of the opener switch.


      1. A01NI0CE01
        Text in Illustration
        *1

        Component without harness connected

        (Back Door Opener Switch Assembly)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Position Specified Condition
        2 (E) - 3 (UL) Back door opener switch assembly (opener switch) not pushed (off) 10 kΩ or higher
        2 (E) - 3 (UL) Back door opener switch assembly (opener switch) pushed (on) Below 1 Ω

        If the result is not specified, replace the back door opener switch assembly.

    2. Check the operation of the lock switch.


      1. A01NGD5E01
        Text in Illustration
        *1

        Component without harness connected

        (Back Door Opener Switch Assembly)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Switch Position Specified Condition
        1 (L) - 2 (E) Back door opener switch assembly (lock switch) not pushed 10 kΩ or higher
        1 (L) - 2 (E) Back door opener switch assembly (lock switch) pushed Below 1 Ω

        If the result is not specified, replace the back door opener switch assembly.