REMOVE ROOF HEADLINING ASSEMBLY
Refer to the procedure up to Remove Roof Headlining Assembly Click here.
REMOVE UPPER BACK WINDOW PANEL TRIM
|*1||2-piece Type Clip|
Disengage the 7 clips and 6 claws, and remove the upper back window panel trim.
If any clips remain on the back door panel after the upper back window panel trim is removed, remove the clips and install them to the upper back window panel trim.
REMOVE REAR ROOF SIDE RAIL PAD LH
Disengage the 2 fasteners and remove the rear roof side rail pad LH.
REMOVE POWER BACK DOOR UNIT ASSEMBLY
Remove the 2 bolts.
Disconnect the connector.
Remove the 5 bolts.
Disengage the claw and remove the power back door unit assembly as shown in the illustration.