POWER BACK DOOR TOUCH SENSOR INSTALLATION


  1. INSTALL POWER BACK DOOR TOUCH SENSOR ASSEMBLY


    1. A01NFXF

      Engage the clip.

    2. Install the power back door touch sensor assembly with the 4 screws.

      Torque:
      3.5 N*m  { 36 kgf*cm, 31 in.*lbf }

    3. Connect the connector.

  2. INSTALL BACK DOOR TRIM PANEL ASSEMBLY


    1. A01NH51E01
      Text in Illustration
      *1 2-piece Type Clip

      Engage the 2 claws and 16 clips to install the back door trim panel assembly.

    2. Install the 2 screws.

  3. INSTALL BACK DOOR SERVICE HOLE COVER LH


    1. A01NH4X

      Engage the 5 claws to install the back door service hole cover LH.

  4. INSTALL BACK DOOR SERVICE HOLE COVER RH


    1. A01NCYF

      Engage the 5 claws to install the back door service hole cover RH.

  5. INSTALL BACK DOOR UPPER TRIM COVER LH


    1. A01ND49

      Engage the 2 claws to install the back door upper trim cover LH.

  6. INSTALL BACK DOOR UPPER TRIM COVER RH


    1. A01NF17

      Engage the 2 claws to install the back door upper trim cover RH.

  7. INSTALL NO. 2 ROOM LIGHT ASSEMBLY


    1. Connect the connector.

    2. A01NHOL

      Engage the claw to install the No. 2 room light assembly.

  8. INSTALL BACK DOOR LOCK COVER


    1. A01NDAS

      Engage the 4 claws to install the back door lock cover.

  9. INSTALL BACK DOOR TRIM BASE


    1. A01NHW1

      Engage the 4 claws to install the back door trim base.

  10. INSTALL DOOR PULL HANDLE WITH SWITCH


    1. Connect the connector.

    2. A01NH9U

      Engage the 6 claws to install the door pull handle with switch.

  11. INSTALL TONNEAU COVER SUB-ASSEMBLY