REAR CENTER SEAT INNER BELT ASSEMBLY INSPECTION


  1. INSPECT REAR SEAT INNER BELT ASSEMBLY CENTER

    A01NDH9E01
    Text in Illustration
    *1

    Component without harness connected

    (Rear Seat Inner Belt Assembly Center)

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 (CBR+) - 2 (CBR-) Rear seat belt center fastened Below 1 Ω
      1 (CBR+) - 2 (CBR-) Rear seat belt center not fastened 10 kΩ or higher

      If the result is not as specified, replace the rear seat inner belt assembly center.