REAR SEAT INNER BELT ASSEMBLY (for RH Side) INSPECTION


  1. INSPECT REAR SEAT INNER BELT ASSEMBLY RH

    A01NGBLE01
    Text in Illustration
    *1

    Component without harness connected

    (Rear Seat Inner Belt Assembly RH)

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 (RBR+) - 2 (RBR-) Rear seat belt RH fastened Below 1 Ω
      1 (RBR+) - 2 (RBR-) Rear seat belt RH not fastened 10 kΩ or higher

      If the result is not as specified, replace the rear seat inner belt assembly RH.