FRONT SEAT INNER BELT ASSEMBLY INSPECTION


  1. INSPECT FRONT SEAT INNER BELT ASSEMBLY (for FRONT PASSENGER SIDE)

    A01NCY1E06
    Text in Illustration
    *1

    Component without harness connected

    (Front Seat Inner Belt Assembly (for Front Passenger Side))
    *2

    Front view of wire harness connector

    (to Occupant Detection Sensor (Separate Type Front Seat Cushion Pad))
    *3 for LHD
    *4 for RHD

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition

      Z7-1 (WS+) - A-1*3

      a5-1 (WS+) - A-1*4

      		 Always Below 1 Ω

      Z7-4 (E) - A-3*3

      a5-4 (E) - A-3*4

      		 Front passenger seat belt unfastened Below 1 Ω

      Z7-4 (E) - A-3*3

      Z7-4 (E) - A-3*4

      		 Front passenger seat belt fastened 10 kΩ or higher

      • *3: for LHD

      • *4: for RHD

      If the result is not as specified, replace the front seat inner belt assembly.