OCCUPANT DETECTION SENSOR REMOVAL


  1. REMOVE FRONT SEAT ASSEMBLY (for Front Passenger Side)


    1. Remove the front seat assembly Click here.

  2. REMOVE FRONT SEAT INNER BELT ASSEMBLY


    1. Disconnect each connector and clamp.

    2. A01NDP5

      Remove the nut and the front seat inner belt assembly.

  3. REMOVE RECLINING POWER SEAT SWITCH KNOB


    1. A01NDGB

      Using a moulding remover, disengage the 4 claws and remove the reclining power seat switch knob.

  4. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB


    1. A01NGRT

      Using a moulding remover, disengage the 2 claws as shown in the illustration.

    2. A01NDHK

      Using a moulding remover, disengage the 2 claws and remove the slide and vertical power seat switch knob.

  5. REMOVE FRONT SEAT CUSHION SHIELD ASSEMBLY


    1. A01NFR1

      Disengage the 2 hooks and remove the 2 rubber bands of the front seatback board from the front seat frame.

    2. A01NHTE

      Remove the 5 screws.

    3. Disengage the claw and guide.

    4. Disconnect the connector from the front power seat lumbar switch.

    5. w/ Seat Cushion Front Edge Adjustment Function:


      1. A01NG4V

        Disengage the 2 clamps.

      2. Disconnect the connector from the seat variable cushion switch.

    6. Remove the front seat cushion shield assembly.

  6. REMOVE FRONT SEAT CUSHION INNER SHIELD


    1. A01NGRF

      Remove the screw.

    2. Disengage the claw.

    3. A01NE98

      Separate the guide and remove the front seat cushion inner shield as shown in the illustration.

  7. REMOVE POWER SEAT SWITCH


    1. A01ND2C

      Remove the 3 screws.

    2. Disengage the guide.

    3. A01NEDR

      Disconnect the 2 connectors and remove the power seat switch.

  8. REMOVE FRONT SEAT CUSHION COVER WITH PAD (w/o Seat Cushion Front Edge Adjustment Function)


    1. A01NDMT

      Disengage the 6 hooks.

    2. w/o Climate Control Seat System:


      1. A01NFJ9

        Disengage the 5 clamps.

    3. w/ Climate Control Seat System:


      1. A01NEUM

        Disconnect the 2 connectors.

      2. Disengage the 6 clamps.

    4. Using a clip remover, remove the 2 clips.

      A01NHS4

      for Front Passenger Side:


      1. A01NE0K

        Disengage the 2 clamps and separate the occupant detection sensor connector.

    5. Disengage each hook and remove the front seat cushion cover with pad.

  9. REMOVE FRONT SEAT CUSHION COVER WITH PAD (w/ Seat Cushion Front Edge Adjustment Function)


    1. A01NDMT

      Disengage the 6 hooks.

    2. w/o Climate Control Seat System:


      1. A01NFJ9

        Disengage the 5 clamps.

    3. w/ Climate Control Seat System:


      1. A01NEUM

        Disconnect the 2 connectors.

      2. Disengage the 6 clamps.

    4. Using a clip remover, remove the 2 clips.

      A01NHS4

    5. for Front Passenger Side:


      1. A01NE0K

        Disengage the 2 clamps and separate the occupant detection sensor connector.

    6. Disengage each hook.

    7. A01ND0G

      Disengage the 4 hooks.

    8. A01NH63

      Remove the 2 hog rings.

    9. Remove the front seat cushion cover with pad.

  10. REMOVE SEPARATE TYPE FRONT SEAT CUSHION PAD (w/o Seat Cushion Front Edge Adjustment Function)


    1. A01NF8X

      Remove the 2 hog rings.

    2. A01NFQ2

      Remove the 19 hog rings and the separate type front seat cushion pad from the separate type front seat cushion cover.

  11. REMOVE SEPARATE TYPE FRONT SEAT CUSHION PAD (w/ Seat Cushion Front Edge Adjustment Function)


    1. A01NF8X

      Remove the 2 hog rings.

    2. A01NGI7

      Remove the 15 hog rings and the separate type front seat cushion pad from the separate type front seat cushion cover.