FRONT SEAT OUTER BELT ASSEMBLY INSPECTION


  1. INSPECT FRONT SEAT OUTER BELT ASSEMBLY

    A01NFY6E01

    Note

    Do not disassemble the retractor.


    1. Before installing the front seat outer belt assembly, check the ELR.


      1. When the inclination of the retractor is 15° or less, check that the belt can be pulled out from the retractor. When the inclination of the retractor is over 45°, check that the belt locks.

        If the result is not as specified, replace the front seat outer belt assembly.

    2. A01NHIJE04

      Check the tension reducer operation.

      CAUTION:

      Do not apply auxiliary battery voltage to the pretensioner connector.


      1. Connect a positive (+) lead of the auxiliary battery terminal 1 (IG) and a negative (-) lead to terminal 2 (L) of the tension reducer connector.

      2. Check that an operating sound is heard when the magnetized solenoid is attracting the plunger.

      3. Pull out the seat belt and let it retract. Listen to the operating sound.

      4. Pull out the seat belt again, disconnect the auxiliary battery negative (-) lead and let it retract. Listen to the operating sound again and check that the operating sound volume has increased.

        If the result is not as specified, replace the outer belt assembly.