SEAT BELT WARNING SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZE FUNCTION WITH INTELLIGENT TESTER

    Note


    • Be sure to record the current settings before customizing.

    • These buzzers should be ON for safe driving. Perform this procedure only if it is necessary to set the buzzer OFF (disabled).

    Tech Tips

    The following items can be customized using the intelligent tester.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Combination Meter / Utility / Customize Setting.

    5. Select the setting by referring to the table below.

      Combination Meter
      Tester Display Default Content Setting
      Driver Side Seatbelt Warning Buzzer* ON Function to sound the seat belt warning buzzer ON/OFF
      Front Passenger Side Seatbelt Warning Buzzer* ON Function to sound the seat belt warning buzzer ON/OFF
      Rear Seat Belt Warning Buzzer* ON Function to sound the seat belt warning buzzer ON/OFF

      *: This setting is only valid when the vehicle is driven at 20 km/h (12 mph) or more.