LUMBAR SWITCH INSPECTION


  1. INSPECT FRONT POWER SEAT LUMBAR SWITCH LH


    1. A01NCZME01

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 (B) - 4 (H) HOLD Below 1 Ω
      2 (E2) - 1 (R) HOLD Below 1 Ω
      4 (H) - 5 (E) OFF Below 1 Ω
      1 (R) - 2 (E2) OFF Below 1 Ω
      3 (B) - 1 (R) RELEASE Below 1 Ω
      4 (H) - 5 (E) RELEASE Below 1 Ω

      If the result is not as specified, replace the switch.

  2. INSPECT FRONT POWER SEAT LUMBAR SWITCH RH


    1. A01NE6IE01

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 (B) - 4 (H) HOLD Below 1 Ω
      2 (E2) - 1 (R) HOLD Below 1 Ω
      1 (R) - 2 (E2) OFF Below 1 Ω
      4 (H) - 5 (E) OFF Below 1 Ω
      3 (B) - 1 (R) RELEASE Below 1 Ω
      5 (E) - 4 (H) RELEASE Below 1 Ω

      If the result is not as specified, replace the switch.