POWER SEAT SWITCH INSPECTION


  1. INSPECT POWER SEAT FRONT SWITCH ASSEMBLY LH


    1. A01NDLFE02

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance (Slide Switch)
      Tester Connection Switch Condition Specified Condition
      1 (B) - 9 (SLDF) FRONT Below 1 Ω
      4 (E) - 6 (SLDR) FRONT Below 1 Ω
      4 (E) - 6 (SLDR) OFF Below 1 Ω
      4 (E) - 9 (SLDF) OFF Below 1 Ω
      1 (B) - 6 (SLDR) REAR Below 1 Ω
      4 (E) - 9 (SLDF) REAR Below 1 Ω
      Standard Resistance (Front Vertical Switch)
      Tester Connection Switch Condition Specified Condition
      1 (B) - 10 (FUP) UP Below 1 Ω
      4 (E) - 5 (FDWN) UP Below 1 Ω
      4 (E) - 5 (FDWN) OFF Below 1 Ω
      4 (E) - 10 (FUP) OFF Below 1 Ω
      1 (B) - 5 (FDWN) DOWN Below 1 Ω
      4 (E) - 10 (FUP) DOWN Below 1 Ω
      Standard Resistance (Lifter Switch)
      Tester Connection Switch Condition Specified Condition
      1 (B) - 7 (LUP) UP Below 1 Ω
      4 (E) - 8 (LDWN) UP Below 1 Ω
      4 (E) - 8 (LDWN) OFF Below 1 Ω
      4 (E) - 7 (LUP) OFF Below 1 Ω
      1 (B) - 8 (LDWN) DOWN Below 1 Ω
      4 (E) - 7 (LUP) DOWN Below 1 Ω
      Standard Resistance (Reclining Switch)
      Tester Connection Switch Condition Specified Condition
      1 (B) - 3 (RCLF) FRONT Below 1 Ω
      4 (E) - 2 (RCLR) FRONT Below 1 Ω
      4 (E) - 2 (RCLR) OFF Below 1 Ω
      4 (E) - 3 (RCLF) OFF Below 1 Ω
      1 (B) - 2 (RCLR) REAR Below 1 Ω
      4 (E) - 3 (RCLF) REAR Below 1 Ω

  2. INSPECT POWER SEAT FRONT SWITCH ASSEMBLY RH


    1. A01NGPAE04

      Measure the resistance according to the value(s) in the table below.

      if the result is not as specified, replace the switch.

      Standard Resistance (Slide Switch)
      Tester Connection Switch Condition Specified Condition
      1 (B) - 9 (SLDF) FRONT Below 1 Ω
      4 (E) - 6 (SLDR) FRONT Below 1 Ω
      4 (E) - 6 (SLDR) OFF Below 1 Ω
      4 (E) - 9 (SLDF) OFF Below 1 Ω
      1 (B) - 6 (SLDR) REAR Below 1 Ω
      4 (E) - 9 (SLDF) REAR Below 1 Ω
      Standard Resistance (Front Vertical Switch)
      Tester Connection Switch Condition Specified Condition
      1 (B) - 5 (FUP) UP Below 1 Ω
      4 (E) - 10 (FDWN) UP Below 1 Ω
      4 (E) - 5 (FUP) OFF Below 1 Ω
      4 (E) - 10 (FDWN) OFF Below 1 Ω
      1 (B) - 10 (FDWN) DOWN Below 1 Ω
      4 (E) - 5 (FUP) DOWN Below 1 Ω
      Standard Resistance (Lifter Switch)
      Tester Connection Switch Condition Specified Condition
      1 (B) - 8 (LUP) UP Below 1 Ω
      4 (E) - 7 (LDWN) UP Below 1 Ω
      4 (E) - 8 (LUP) OFF Below 1 Ω
      4 (E) - 7 (LDWN) OFF Below 1 Ω
      1 (B) - 7 (LDWN) DOWN Below 1 Ω
      4 (E) - 8 (LUP) DOWN Below 1 Ω
      Standard Resistance (Reclining Switch)
      Tester Connection Switch Condition Specified Condition
      1 (B) - 3 (RCLF) UP Below 1 Ω
      4 (E) - 2 (RCLR) UP Below 1 Ω
      4 (E) - 2 (RCLR) OFF Below 1 Ω
      4 (E) - 3 (RCLF) OFF Below 1 Ω
      1 (B) - 2 (RCLR) DOWN Below 1 Ω
      4 (E) - 3 (RCLF) DOWN Below 1 Ω

      If the result is not as specified, replace the switch.