REAR SEAT ASSEMBLY (for RH Side) REASSEMBLY


  1. INSTALL REAR SEAT CUSHION SPRING ASSEMBLY RH


    1. A01NF4A

      Using a T45 "TORX" socket wrench, install the rear seat cushion spring assembly with the 4 bolts and 4 bushes.

      Torque:
      21 N*m  { 214 kgf*cm, 16 ft.*lbf }

  2. INSTALL REAR SEAT RECLINING CONTROL CABLE


    1. A01NDSX

      Engage the claw to install the rear seat hook.

    2. Engage the 4 rear seat hooks.

    3. Engage the 6 cable clamps and install the rear seat reclining control cable.

      A01NCNY

  3. INSTALL NO. 2 REAR SEAT COVER


    1. A01NF7U

      Install the No. 2 rear seat cover with the screw.

  4. INSTALL NO. 1 REAR SEAT COVER


    1. A01NCM2

      Install the No. 1 rear seat cover with the screw.

  5. INSTALL REAR SEAT RECLINING INNER COVER RH


    1. A01NFPG

      Engage the 2 guides.

    2. Install the rear seat reclining inner cover RH with the screw.

  6. INSTALL REAR SEAT CUSHION SIDE COVER LH


    1. A01NGUM

      Engage the claw.

    2. Install the rear seat cushion side cover LH with the 2 screws.

  7. INSTALL REAR SEAT CUSHION MOULDING RH


    1. A01NFSG

      Engage the 3 claws.

    2. Install the rear seat cushion moulding RH with the 3 screws.

  8. INSTALL REAR SEATBACK COVER RH


    1. A01NGSX

      Engage the claw.

    2. Install the rear seatback cover RH with the 2 screws.

  9. INSTALL SEPARATE TYPE REAR SEATBACK COVER


    1. A01NH1T

      Using hog ring pliers, install the separate type rear seatback cover with 12 new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

    2. A01NEH8

      As shown in the illustration, pass the bracket of the separate type rear seatback cover through the separate type rear seatback pad.

      Note

      After installing the bracket, check that the band is not twisted.

  10. INSTALL REAR CENTER SEAT OUTER BELT ASSEMBLY


    1. A01NHG9

      Install the rear center seat outer belt assembly with the bolt and nut.

      Torque:
      Bolt
      7.5 N*m  { 77 kgf*cm, 66 in.*lbf }
      Nut
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

  11. INSTALL REAR SEAT SHOULDER BELT COVER


    1. A01NHHB

      Engage the claw and guide, and install the rear seat shoulder belt cover as shown in the illustration.

    2. A01NGBR

      Engage the 3 claws to install the belt support plate.

  12. INSTALL REAR SEATBACK COVER WITH PAD


    1. A01NEG5E01
      Text in Illustration
      *1 Side Airbag

      Temporarily install the side airbag so that it is stored inside the rear seatback cover with pad.

    2. Install bracket A onto the bolt and insert the guide.

      A01NFE6E01
      Text in Illustration
      *1 Bracket A *2 Bracket B

    3. Install bracket B onto the bolt and insert the guide.

    4. Install the rear seatback cover bracket with the nut.

      Torque:
      5.6 N*m  { 57 kgf*cm, 50 in.*lbf }

      Note


      • For vehicles with side airbags, the side airbags may not be activated normally unless the rear seatback cover is securely installed.

      • Check that the strap is not twisted after installing the bracket.

      • Install the bracket securely.

    5. A01NGH7

      Using hog ring pliers, install a new hog ring.

      Note


      • Be careful not to damage the cover.

      • When installing the hog ring, take care to minimize wrinkles as much as possible.

    6. Engage the hook.

    7. A01NGLX

      Install the rear seat belt hook with the bolt.

      Torque:
      6.0 N*m  { 61 kgf*cm, 53 in.*lbf }
    8. A01NEXX

      Using hog ring pliers, install 6 new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

    9. Engage the 5 hooks.

    10. A01NGVVE01
      Text in Illustration
      *1 Fastener

      Engage the 2 fasteners and install the rear seatback cover with pad.

  13. INSTALL REAR SEAT HEADREST SUPPORT RH


    1. A01ND9F

      Engage the 2 claws to install the rear seat headrest support RH.

  14. INSTALL REAR SEAT HEADREST SUPPORT LH


    1. A01NDWT

      Engage the 2 claws to install the rear seat headrest support LH.

  15. CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY


    1. A01NGMF

      Connect the rear center seat outer belt assembly with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

  16. INSTALL REAR SEAT SHOULDER BELT HOLE COVER


    1. A01NGV6

      Move the rear seat shoulder belt hole cover in the direction indicated by the arrow in the illustration to engage the 2 guides.

    2. Move the rear seat shoulder belt hole cover in the direction indicated by the arrow in the illustration to engage the 2 claws and install the cover.

  17. INSTALL SEAT BELT ANCHOR COVER CAP


    1. A01NHN2

      Engage the 2 claws and install the seat belt anchor cover cap.

  18. INSTALL NO. 1 FOLD SEAT STOPPER BAND ASSEMBLY


    1. A01NGXL

      Engage the guide.

    2. Install the No. 1 fold seat stopper band assembly with the bolt.

      Torque:
      9.0 N*m  { 92 kgf*cm, 80 in.*lbf }

  19. INSTALL REAR SEATBACK BOARD CARPET ASSEMBLY RH


    1. A01NCWF

      Engage the guide.

    2. Engage the 2 clips and install the rear seatback board carpet assembly RH.

  20. INSTALL REAR SEATBACK COVER RH


    1. A01NEYX

      Engage the 4 claws to install the rear seatback cover RH.

  21. INSTALL TONNEAU COVER HOOK HOLDER


    1. A01NDXI

      Engage the 2 guides.

    2. Install the 2 tonneau cover hook holders with the 2 screws.

  22. INSTALL REAR SEAT LOCK STRIKER


    1. A01NFSC

      Using a T45 "TORX" socket, install the "TORX" bolt to the rear seat lock striker.

      Torque:
      21 N*m  { 214 kgf*cm, 16 ft.*lbf }

  23. INSTALL REAR SEATBACK LOCK STRIKER PROTECTOR


    1. A01NGO5

      Install the rear seatback lock striker protector.

  24. INSTALL SEPARATE TYPE REAR SEAT CUSHION COVER


    1. A01NEOQ

      Using hog ring pliers, install the separate type rear seat cushion cover with 11 new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

  25. INSTALL REAR SEAT CUSHION COVER WITH PAD


    1. A01NFQE

      Using hog ring pliers, install 2 new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

    2. A01NHND

      Using hog ring pliers, install 2 new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

    3. A01NH67

      Engage the 2 elastic bands.

    4. A01NFNG

      Engage each hook.

    5. A01NHC9

      Engage the 2 hooks to install the rear seat cushion cover with pad.

  26. INSTALL REAR SEAT CUSHION MOULDING RH


    1. A01NEK7

      Engage the 2 guides as shown in the illustration.

    2. Install the rear seat cushion moulding RH with the 2 screws.

  27. INSTALL NO. 1 RECLINING ADJUSTER RELEASE HANDLE RH


    1. A01NFAE

      Install the No. 1 reclining adjuster release handle RH with the 3 screws.

  28. INSTALL REAR SEAT COVER CAP


    1. A01NEH0

      Engage the 3 claws to install the rear seat cover cap.

  29. INSTALL REAR SEAT CENTER ARMREST BOX


    1. A01NFU1

      Install the rear seat center armrest box.

  30. INSTALL REAR SEAT CENTER ARMREST DOOR SUB-ASSEMBLY


    1. A01NHN0

      Install the rear seat center armrest door sub-assembly with the 2 screws.

  31. INSTALL CUP HOLDER


    1. A01NHHX

      Engage the 2 clips.

    2. Install the cup holder with the 2 screws.

  32. INSTALL REAR SEAT CENTER ARMREST ASSEMBLY

  33. INSTALL NO. 2 REAR SEAT RECLINING SPACER


    1. A01NCO5

      Install the No. 2 rear seat reclining spacer to the rear seat center armrest assembly.

  34. INSTALL REAR SEAT CENTER ARMREST SUPPORT RH


    1. A01NG0E

      Engage the guide and install the nut.

    2. A01NDLZ

      Using a T45 "TORX" socket, tighten the "TORX" bolt, bush, and install the rear seat center armrest support RH.

      Torque:
      13 N*m  { 128 kgf*cm, 9 ft.*lbf }

  35. INSTALL REAR SEATBACK MOULDING RH


    1. A01NDBI

      Engage the 2 guides.

    2. Install the rear seatback moulding RH with the 3 screws.

  36. INSTALL REAR SEATBACK MOULDING LH


    1. A01NHJI

      Engage the 2 guides.

    2. Install the rear seatback moulding LH with the 3 screws.

  37. INSTALL REAR CENTER SEATBACK HINGE


    1. A01NDOS

      Using a T45 "TORX" socket, tighten the "TORX" bolt, bush, and install the rear center seatback hinge.

      Torque:
      21 N*m  { 214 kgf*cm, 16 ft.*lbf }

  38. INSTALL REAR SEATBACK HINGE LH


    1. A01NH76

      Using a T45 "TORX" socket, tighten the "TORX" bolt, bush, and install the rear seatback hinge LH.

      Torque:
      21 N*m  { 214 kgf*cm, 16 ft.*lbf }

  39. INSTALL CENTER SEAT CUSHION FRAME SUB-ASSEMBLY


    1. A01NFEA

      Using a T45 "TORX" socket, tighten the 2 "TORX" bolts and 2 bushes and install the center seat cushion frame sub-assembly.

      Torque:
      21 N*m  { 214 kgf*cm, 16 ft.*lbf }

  40. INSTALL NO. 2 CENTER SEATBACK COVER


    1. A01NGOT

      Engage the 2 claws.

    2. Install the No. 2 center seatback cover with the screw.

  41. INSTALL NO. 1 SEATBACK COVER


    1. A01NF98

      Connect the rod as shown in the illustration.

    2. A01NF1J

      Engage the guide.

    3. Install the rear seat reclining cover with the 2 screws.

  42. INSTALL COAT HOOK CAP


    1. A01NG8Q

      Engage the 2 claws and guide, and install the coat hook cap as shown in the illustration.

  43. INSTALL REAR SEAT CENTER HEADREST SUPPORT RH


    1. A01NCLH

      Engage the 2 claws to install the rear seat center headrest support RH.

  44. INSTALL REAR SEAT CENTER HEADREST SUPPORT LH


    1. A01NE4L

      Engage the 2 claws to install the rear seat center headrest support LH.

  45. INSTALL REAR SEATBACK BOARD SUB-ASSEMBLY


    1. A01NDGH

      Disengage the 4 clips and install the rear seatback board sub-assembly.

  46. INSTALL REAR SEATBACK LOCK COVER RH


    1. A01NGRK

      Engage the 4 guides and claw, and install the rear seatback lock cover RH as shown in the illustration.

  47. INSTALL REAR CENTER SEATBACK COVER


    1. A01NHVF

      Engage the 4 claws to install the rear center seatback cover.

  48. INSTALL CENTER SEAT CUSHION COVER SUB-ASSEMBLY


    1. A01NGXW

      Engage the center seat cushion cover sub-assembly to the center seat cushion as shown in the illustration.

  49. INSTALL CENTER SEAT CUSHION COVER WITH PAD


    1. A01NDVM

      Engage each hook as shown in the illustration.

    2. A01NFPC

      Engage the 2 hooks and install the center seat cushion cover with pad as shown in the illustration.

  50. INSTALL RECLINING COVER PROTECTOR RH


    1. A01ND95

      Engage the reclining cover protector RH as shown in the illustration.

    2. A01NFN3

      Install the screw.

    3. Install the reclining cover protector RH with the clip.

  51. INSTALL RECLINING COVER PROTECTOR LH


    1. A01NCZT

      Engage the reclining cover protector LH as shown in the illustration.

    2. A01NCTU

      Install the screw.

    3. Install the reclining cover protector LH with the clip.

  52. INSTALL REAR CENTER SEAT ASSEMBLY


    1. A01ND7N

      Engage the elastic band.

    2. A01NED6

      Install the rear seat center seat assembly with the 4 bolts.

      Torque:
      21 N*m  { 214 kgf*cm, 16 ft.*lbf }

  53. INSTALL UPPER CENTER SEAT HINGE COVER LH


    1. A01NHXV

      Install the upper center seat hinge cover LH.

  54. INSTALL REAR SEAT INNER BELT ASSEMBLY


    1. A01NHE6

      Install the rear seat inner belt assembly with the bolt.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

    2. Engage each clamp and connect the connector.