FRONT POWER SEAT CONTROL SYSTEM (w/ Memory) DATA LIST / ACTIVE TEST


  1. DATA LIST

    Tech Tips

    Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

    Note

    In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.


    1. Turn the power switch off.

    2. Connect the intelligent tester to the DLC3.

    3. Turn the power switch on (IG).

    4. Turn the intelligent tester on.

    5. Enter the following menus: Body / Mirror L / Data List.

    6. Read the Data List according to the display on the intelligent tester.

      Mirror L
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      Seat Memory Switch 1 M1 switch / ON or OFF

      ON: M1 switch on

      OFF: M1 switch off

      -
      Seat Memory Switch 2 M2 switch / ON or OFF

      ON: M2 switch on

      OFF: M2 switch off

      -
      Seat Memory Switch 3 M3 switch / ON or OFF

      ON: M3 switch on

      OFF: M3 switch off

      -
      Seat Memory Set Switch SET switch / ON or OFF

      ON: SET switch on

      OFF: SET switch off

      -
    7. Enter the following menus: Body / Mirror R / Data List.

    8. Read the Data List according to the display on the intelligent tester.

      Mirror R
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      Seat Memory Switch 1 M1 switch / ON or OFF

      ON: M1 switch on

      OFF: M1 switch off

      -
      Seat Memory Switch 2 M2 switch / ON or OFF

      ON: M2 switch on

      OFF: M2 switch off

      -
      Seat Memory Switch 3 M3 switch / ON or OFF

      ON: M3 switch on

      OFF: M3 switch off

      -
      Seat Memory Set Switch SET switch / ON or OFF

      ON: SET switch on

      OFF: SET switch off

      -
    9. Enter the following menus: Body / Driver Seat / Data List.

    10. Read the Data List according to the display on the intelligent tester.

      Driver Seat
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      Reclining Rear Reclining switch signal (Rearward) / ON or OFF

      ON: Reclining switch (Rearward) on

      OFF: Reclining switch (Rearward) off

      -
      Reclining Front Reclining switch signal (Forward) / ON or OFF

      ON: Reclining switch (Forward) on

      OFF: Reclining switch (Forward) off

      -
      Front Vertical Down Front vertical switch signal (Downward) / ON or OFF

      ON: Front vertical switch (Downward) on

      OFF: Front vertical switch (Downward) off

      -
      Front Vertical Up Front vertical switch signal (Upward) / ON or OFF

      ON: Front vertical switch (Upward) on

      OFF: Front vertical switch (Upward) off

      -
      Lifter Switch Down Lifter switch signal (Downward) / ON or OFF

      ON: Lifter switch (Downward) on

      OFF: Lifter switch (Downward) off

      -
      Lifter Switch Up Lifter switch signal (Upward) / ON or OFF

      ON: Lifter switch (Upward) on

      OFF: Lifter switch (Upward) off

      -
      Slide Rear Sliding switch signal (Rearward) / ON or OFF

      ON: Sliding switch (Rearward) on

      OFF: Sliding switch (Rearward) off

      -
      Slide Front Sliding switch signal (Forward) / ON or OFF

      ON: Sliding switch (Forward) on

      OFF: Sliding switch (Forward) off

      -
      Seat Memory No1 Seat position memorized with M1 switch / Mem or Not Mem

      Mem: Memorized

      Not Mem: Not memorized

      -
      Seat Memory No2 Seat position memorized with M2 switch / Mem or Not Mem

      Mem: Memorized

      Not Mem: Not memorized

      -
      Seat Memory No3 Seat position memorized with M3 switch / Mem or Not Mem

      Mem: Memorized

      Not Mem: Not memorized

      -
      Ignition Switch Communication state of power switch signal / ON or OFF

      ON: Power switch on (IG) signal received

      OFF: Power switch off signal not received

      -
      P Switch Shift lever position P signal / ON or OFF

      ON: Shift lever in P

      OFF: Shift lever not in P

      -
      Parking Brake SW Parking brake switch status / ON or OFF

      ON: Parking brake applied

      OFF: Parking brake released

      -
      Vehicle Speed Vehicle speed data / min.: 0 km/h (0 mph), max.: 255 km/h (158 mph) Actual vehicle speed -
      Power Voltage Power supply for front power seat switch / min: 0 V, max: 19.89 V Within range from 11 V to 14 V -
      Slide Position Seat sliding position / min: 0000, max: 65535

      0: Frontmost sliding position

      65535: Rearmost sliding position

      -
      Reclining Position Seat reclining position / min: 0000, max: 65535

      0: Uppermost reclining position

      65535: Lowest reclining position

      -
      Front Vertical Position Seat front vertical position / min: 0000, max: 65535

      0: Frontmost front vertical position

      65535: Rearmost front vertical position

      -
      Lifter Position Seat lifter position / min: 0000, max: 65535

      0: Uppermost lifter position

      65535: Lowest lifter position

      -
      Slide Pos Mem No1 Seat sliding position memorized with M1 switch / min: 0000, max: 65535

      0: Frontmost sliding position

      65535: Rearmost sliding position

      -
      Reclining Pos Mem No1 Seat reclining position memorized with M1 switch / min: 0000, max: 65535

      0: Uppermost reclining position

      65535: Lowest reclining position

      -
      Frnt Vrtcl Pos Mem No1 Front vertical position memorized with M1 switch / min: 0000, max: 65535

      0: Frontmost front vertical position

      65535: Rearmost front vertical position

      -
      Lifter Pos Mem No1 Lifter position memorized with M1 switch / min: 0000, max: 65535

      0: Uppermost lifter position

      65535: Lowest lifter position

      -
      Slide Pos Mem No2 Seat sliding position memorized with M2 switch / min: 0000, max: 65535

      0: Frontmost sliding position

      65535: Rearmost sliding position

      -
      Reclining Pos Mem No2 Seat reclining position memorized with M2 switch / min: 0000, max: 65535

      0: Uppermost reclining position

      65535: Lowest reclining position

      -
      Frnt Vrtcl Pos Mem No2 Front vertical position memorized with M2 switch / min: 0000, max: 65535

      0: Frontmost front vertical position

      65535: Rearmost front vertical position

      -
      Lifter Pos Mem No2 Lifter position memorized with M2 switch / min: 0000, max: 65535

      0: Uppermost lifter position

      65535: Lowest lifter position

      -
      Slide Pos Mem No3 Seat sliding position memorized with M3 switch / min: 0000, max: 65535

      0: Frontmost sliding position

      65535: Rearmost sliding position

      -
      Reclining Pos Mem No3 Seat reclining position memorized with M3 switch / min: 0000, max: 65535

      0: Uppermost reclining position

      65535: Lowest reclining position

      -
      Frnt Vrtcl Pos Mem No3 Front vertical position memorized with M3 switch / min: 0000, max: 65535

      0: Frontmost front vertical position

      65535: Rearmost front vertical position

      -
      Lifter Pos Mem No3 Lifter position memorized with M3 switch / min: 0000, max: 65535

      0: Uppermost lifter position

      65535: Lowest lifter position

      -
      Headrest Switch UP Headrest switch signal (UP) / ON or OFF

      ON: Headrest switch (UP) on

      OFF: Headrest switch (UP) off

      -
      Headrest Switch Down Headrest switch signal (Down) / ON or OFF

      ON: Headrest switch (Down) on

      OFF: Headrest switch (Down) off

      -
      Lifter Initialize Flag Seat lifter limit position memory / ON or OFF

      ON: memorized

      OFF: not memorized

      -
      Front Vertical Init Flag Seat front vertical limit position memory / ON or OFF

      ON: memorized

      OFF: not memorized

      -
      Reclining Position Init Flg Seat reclining limit position memory / ON or OFF

      ON: memorized

      OFF: not memorized

      -
      Slide Position Init Flg Seat sliding limit position memory / ON or OFF

      ON: memorized

      OFF: not memorized

      -
      Slide Position Front Limit Seat sliding position / min: 0000, max: 65535

      0: Frontmost sliding position

      65535: Rearmost sliding position

      -
      Slide Position Rear Limit Seat sliding position / min: 0000, max: 65535

      0: Frontmost sliding position

      65535: Rearmost sliding position

      -
      Reclining Position Front Limit Seat reclining position / min: 0000, max: 65535

      0: Uppermost reclining position

      65535: Lowest reclining position

      -
      Reclining Position Rear Limit Seat reclining position / min: 0000, max: 65535

      0: Uppermost reclining position

      65535: Lowest reclining position

      -
      Front Vertical UP Limit Seat front vertical position / min: 0000, max: 65535

      0: Frontmost front vertical position

      65535: Rearmost front vertical position

      -
      Front Vertical Down Limit Seat front vertical position / min: 0000, max: 65535

      0: Frontmost front vertical position

      65535: Rearmost front vertical position

      -
      Lifter Position UP Limit Seat lifter position / min: 0000, max: 65535

      0: Uppermost lifter position

      65535: Lowest lifter position

      -
      Lifter Position Down Limit Seat lifter position / min: 0000, max: 65535

      0: Uppermost lifter position

      65535: Lowest lifter position

      -
      Shift P SW (PMN) Shift lever position P signal / ON or OFF

      ON: Shift lever in P

      OFF: Shift lever not in P

      -
      Memory Button Buzzer Request Driver seat buzzer request display / OFF, MOVE, REGISTRY, CANCEL, REG NG, REG WAIT

      OFF: Buzzer does not sound

      MOVE: Request to sound buzzer when starting memory replay

      REGISTRY: Request to sound buzzer when starting memory registration

      CANCEL: Request to sound buzzer when canceling memory call registration

      REG NG: Request to sound buzzer when memory call registration not possible

      REG WAIT: Request to sound buzzer when starting memory call cabin scan

      -
      Driver Seat Request Command Driver seat operation request received / OFF, MEMORY, MEM MOV, MEM SOD, RES MOV, AWY MOV, ASY SOD, MEM AWY or MEM RET

      OFF: No instruction

      MEMORY: Request to memorize

      MEM MOV: Request to recall memory

      MEM SOD: Request to replay

      RET MOV: Request to return

      AWAY MOV: Request to move away

      AWAY SOD: Request to recall away position memory

      MEM AWAY: Request to recall memorized position of seat back

      MEM RET: Request to restore seat back to memorized position

      -
      Driver Seat POS REQ Seat memory switch operation value / OFF, MEM1, MEM2, MEM3, DRV1, DRV2 or DRV3

      OFF: No operation

      MEM1: M1 switch operation status

      MEM2: M2 switch operation status

      MEM3: M3 switch operation status

      DRV1: Other 1 operation status

      DRV2: Other 2 operation status

      DRV3: Other 3 operation status

      -
      Away Move Range Scale Driver seat slide away distance / NONE, SMALL, STANDARD or LONG

      NONE: No movement

      SMALL: Moves short distance

      STANDARD: Moves standard distance

      -
      Return Move Return destination / AVAIL or NOT AVAIL

      AVAIL: Return destination set

      NOT AVAIL: Return destination not set

      -
      Return and Away Function Power easy access system status / ON or OFF

      ON: Power easy access system functioning

      OFF: Power easy access system not functioning

      -
      Driver Seat Buckle SW Status of the driver seatbelt / ON or OFF

      ON: Tongue plate engaged

      OFF: Tongue plate not engaged

      -
      Slide Pos Mem Drv1 Seat sliding position memorized with seat memory switch DRV1 / min: 0000, max: 65535

      0: Frontmost sliding position

      65535: Rearmost sliding position

      -
      Reclining Pos Mem Drv1 Seat reclining position memorized with seat memory switch DRV1 / min: 0000, max: 65535

      0: Uppermost reclining position

      65535: Lowest reclining position

      -
      Front Vertical Pos Mem Drv1 Seat front vertical position memorized with seat memory switch DRV1 / min: 0000, max: 65535

      0: Frontmost front vertical position

      65535: Rearmost front vertical position

      -
      Lifter Pos Mem Drv1 Seat lifter position memorized with seat memory switch DRV1 / min: 0000, max: 65535

      0: Uppermost lifter position

      65535: Lowest lifter position

      -
      Slide Pos Mem Drv2 Seat sliding position memorized with seat memory switch DRV2 / min: 0000, max: 65535

      0: Frontmost sliding position

      65535: Rearmost sliding position

      -
      Reclining Pos Mem Drv2 Seat reclining position memorized with seat memory switch DRV2 / min: 0000, max: 65535

      0: Uppermost reclining position

      65535: Lowest reclining position

      -
      Front Vertical Pos Mem Drv2 Seat front vertical position memorized with seat memory switch DRV2 / min: 0000, max: 65535

      0: Frontmost front vertical position

      65535: Rearmost front vertical position

      -
      Lifter Pos Mem Drv2 Seat lifter position memorized with seat memory switch DRV2 / min: 0000, max: 65535

      0: Uppermost lifter position

      65535: Lowest lifter position

      -
      Return Position Return position / min: 0000, max: 65535 Within range from 0000 to 65535 -
      Sensor Power Voltage Sensor Power Voltage / min: 0 V, max: 19.89 V Within range from 11 V to 14 V -
      Slide Pos Mem Drv3 Seat sliding position memorized with seat memory switch DRV3 / min: 0000, max: 65535

      0: Frontmost sliding position

      65535: Rearmost sliding position

      -
      Reclining Pos Mem Drv3 Seat reclining position memorized with seat memory switch DRV3 / min: 0000, max: 65535

      0: Uppermost reclining position

      65535: Lowest reclining position

      -
      Front Vertical Pos Mem Drv3 Seat front vertical position memorized with seat memory switch DRV3 / min: 0000, max: 65535

      0: Frontmost front vertical position

      65535: Rearmost front vertical position

      -
      Lifter Pos Mem Drv3 Seat lifter position memorized with seat memory switch DRV3 / min: 0000, max: 65535

      0: Uppermost lifter position

      65535: Lowest lifter position

      -
    11. Enter the following menus: Body / Passenger Seat / Data List.

    12. Read the Data List according to the display on the intelligent tester.

      Passenger Seat
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      SET Switch SET switch / ON or OFF

      ON: SET switch on

      OFF: SET switch off

      -
      M1 Switch M1 switch / ON or OFF

      ON: M1 switch on

      OFF: M1 switch off

      -
      M2 Switch M2 switch / ON or OFF

      ON: M2 switch on

      OFF: M2 switch off

      -
      M3 Switch M3 switch / ON or OFF

      ON: M3 switch on

      OFF: M3 switch off

      -
      Reclining Rear Reclining switch signal (Rearward) / ON or OFF

      ON: Reclining switch (Rearward) on

      OFF: Reclining switch (Rearward) off

      -
      Reclining Front Reclining switch signal (Forward) / ON or OFF

      ON: Reclining switch (Forward) on

      OFF: Reclining switch (Forward) off

      -
      Front Vertical Down Front vertical switch signal (Downward) / ON or OFF

      ON: Front vertical switch (Downward) on

      OFF: Front vertical switch (Downward) off

      -
      Front Vertical Up Front vertical switch signal (Upward) / ON or OFF

      ON: Front vertical switch (Upward) on

      OFF: Front vertical switch (Upward) off

      -
      Lifter Switch Up Lifter switch signal (Upward) / ON or OFF

      ON: Lifter switch (Upward) on

      OFF: Lifter switch (Upward) off

      -
      Slide Rear Sliding switch signal (Rearward) / ON or OFF ON: Sliding switch (Rearward) on OFF: Sliding switch (Rearward) off -
      Slide Front Sliding switch signal (Forward) / ON or OFF ON: Sliding switch (Forward) on OFF: Sliding switch (Forward) off -
      Seat Memory No1 Seat position memorized with M1 switch / Mem or Not Mem Mem: Memorized Not Mem: Not memorized -
      Seat Memory No2 Seat position memorized with M2 switch / Mem or Not Mem Mem: Memorized Not Mem: Not memorized -
      Seat Memory No3 Seat position memorized with M3 switch / Mem or Not Mem Mem: Memorized Not Mem: Not memorized -
      Ignition Switch Communication state of power switch signal / ON or OFF ON: Power switch on (IG) signal received OFF: Power switch off signal not received -
      P Switch Shift lever position P signal / ON or OFF

      ON: Shift lever in P

      OFF: Shift lever not in P

      -
      Parking Brake SW Parking brake switch status / ON or OFF

      ON: Parking brake applied

      OFF: Parking brake released

      -
      P-Door Courtesy Front door courtesy light switch assembly signal / ON or OFF

      ON: Front passenger side door open

      OFF: Front passenger side door closed

      -
      Vehicle Speed Vehicle speed data / min.: 0 km/h (0 mph), max.: 255 km/h (158 mph) Actual vehicle speed -
      Power Voltage Front power seat switch / min: 0 V, max: 19.89 V Within range from 11 V to 14 V -
      Slide Position Seat sliding position / min: 0000, max: 65535

      0: Frontmost sliding position

      65535: Rearmost sliding position

      -
      Reclining Position Seat reclining position / min: 0000, max: 65535

      0: Uppermost reclining position

      65535: Lowest reclining position

      -
      Front Vertical Position Seat front vertical position / min: 0000, max: 65535

      0: Frontmost front vertical position

      65535: Rearmost front vertical position

      -
      Lifter Position Seat lifter position / min: 0000, max: 65535

      0: Uppermost lifter position

      65535: Lowest lifter position

      -
      Slide Pos Mem No1 Seat sliding position memorized with M1 switch / min: 0000, max: 65535

      0: Frontmost sliding position

      65535: Rearmost sliding position

      -
      Reclining Pos Mem No1 Seat reclining position memorized with M1 switch / min: 0000, max: 65535

      0: Uppermost reclining position

      65535: Lowest reclining position

      -
      Frnt Vrtcl Pos Mem No1 Front vertical position memorized with M1 switch / min: 0000, max: 65535

      0: Frontmost front vertical position

      65535: Rearmost front vertical position

      -
      Lifter Pos Mem No1 Lifter position memorized with M1 switch / min: 0000, max: 65535

      0: Uppermost lifter position

      65535: Lowest lifter position

      -
      Slide Pos Mem No2 Seat sliding position memorized with M2 switch / min: 0000, max: 65535

      0: Frontmost sliding position

      65535: Rearmost sliding position

      -
      Reclining Pos Mem No2 Seat reclining position memorized with M2 switch / min: 0000, max: 65535

      0: Uppermost reclining position

      65535: Lowest reclining position

      -
      Frnt Vrtcl Pos Mem No2 Front vertical position memorized with M2 switch / min: 0000, max: 65535

      0: Frontmost front vertical position

      65535: Rearmost front vertical position

      -
      Lifter Pos Mem No2 Lifter position memorized with M2 switch / min: 0000, max: 65535

      0: Uppermost lifter position

      65535: Lowest lifter position

      -
      Slide Pos Mem No3 Seat sliding position memorized with M3 switch / min: 0000, max: 65535

      0: Frontmost sliding position

      65535: Rearmost sliding position

      -
      Reclining Pos Mem No3 Seat reclining position memorized with M3 switch / min: 0000, max: 65535

      0: Uppermost reclining position

      65535: Lowest reclining position

      -
      Frnt Vrtcl Pos Mem No3 Front vertical position memorized with M3 switch / min: 0000, max: 65535

      0: Frontmost front vertical position

      65535: Rearmost front vertical position

      -
      Lifter Pos Mem No3 Lifter position memorized with M3 switch / min: 0000, max: 65535

      0: Uppermost lifter position

      65535: Lowest lifter position

      -
      Headrest Switch UP Headrest switch signal (UP) / ON or OFF ON: Headrest switch (UP) on OFF: Headrest switch (UP) off -
      Headrest Switch Down Headrest switch signal (Down) / ON or OFF ON: Headrest switch (Down) on OFF: Headrest switch (Down) off -
      Lifter Initialize Flag Seat lifter limit position memory / ON or OFF

      0: Uppermost lifter position

      65535: Lowest lifter position

      -
      Front Vertical Init Flag Seat front vertical limit position memory / ON or OFF

      0: Frontmost front vertical position

      65535: Rearmost front vertical position

      -
      Reclining Position Init Flg Seat reclining limit position memory / ON or OFF

      0: Uppermost reclining position

      65535: Lowest reclining position

      -
      Slide Position Init Flag Seat sliding limit position memory / ON or OFF

      0: Frontmost sliding position

      65535: Rearmost sliding position

      -
      Slide Position Front Limit Seat sliding position / min: 0000, max: 65535

      0: Frontmost sliding position

      65535: Rearmost sliding position

      -
      Slide Position Rear Limit Seat sliding position / min: 0000, max: 65535

      0: Frontmost sliding position

      65535: Rearmost sliding position

      -
      Reclining Position Front Limit Seat reclining position / min: 0000, max: 65535

      0: Uppermost reclining position

      65535: Lowest reclining position

      -
      Reclining Position Rear Limit Seat reclining position / min: 0000, max: 65535

      0: Uppermost reclining position

      65535: Lowest reclining position

      -
      Front Vertical UP Limit Seat front vertical position / min: 0000, max: 65535

      0: Frontmost front vertical position

      65535: Rearmost front vertical position

      -
      Front Vertical Down Limit Seat front vertical position / min: 0000, max: 65535

      0: Frontmost front vertical position

      65535: Rearmost front vertical position

      -
      Lifter Position UP Limit Seat lifter position / min: 0000, max: 65535

      0: Uppermost lifter position

      65535: Lowest lifter position

      -
      Lifter Position Down Limit Seat lifter position / min: 0000, max: 65535

      0: Uppermost lifter position

      65535: Lowest lifter position

      -
      Sensor Power Voltage Return position / min: 0000, max: 65535

      0: Frontmost sliding position

      65535: Rearmost sliding position

      -
    13. Enter the following menus: Body / Main Body / Data List.

    14. Read the Data List according to the display on the intelligent tester.

      Main Body
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      Mem SW No. w/KeyID1 Memory switch linked with key ID1 / NONE, MEM SW1, MEM SW2, or MEM SW3

      NONE: No switches linked with key ID1

      MEM SW1: M1 switch linked with key ID1

      MEM SW2: M2 switch linked with key ID1

      MEM SW3: M3 switch linked with key ID1

      -
      Mem SW No. w/KeyID2 Memory switch linked with key ID2 / NONE, MEM SW1, MEM SW2, or MEM SW3

      NONE: No switches linked with key ID2

      MEM SW1: M1 switch linked with key ID2

      MEM SW2: M2 switch linked with key ID2

      MEM SW3: M3 switch linked with key ID2

      -
      Mem SW No. w/KeyID3 Memory switch linked with key ID3 / NONE, MEM SW1, MEM SW2, or MEM SW3

      NONE: No switches linked with key ID3

      MEM SW1: M1 switch linked with key ID3

      MEM SW2: M2 switch linked with key ID3

      MEM SW3: M3 switch linked with key ID3

      -
      Mem SW No. w/KeyID4 Memory switch linked with key ID4 / NONE, MEM SW1, MEM SW2, or MEM SW3

      NONE: No switches linked with key ID4

      MEM SW1: M1 switch linked with key ID4

      MEM SW2: M2 switch linked with key ID4

      MEM SW3: M3 switch linked with key ID4

      -
      Mem SW No. w/KeyID5 Memory switch linked with key ID5 / NONE, MEM SW1, MEM SW2, or MEM SW3

      NONE: No switches linked with key ID5

      MEM SW1: M1 switch linked with key ID5

      MEM SW2: M2 switch linked with key ID5

      MEM SW3: M3 switch linked with key ID5

      -
      Mem SW No. w/KeyID6 Memory switch linked with key ID6 / NONE, MEM SW1, MEM SW2, or MEM SW3

      NONE: No switches linked with key ID6

      MEM SW1: M1 switch linked with key ID6

      MEM SW2: M2 switch linked with key ID6

      MEM SW3: M3 switch linked with key ID6

      -
      Mem SW No. w/KeyID7 Memory switch linked with key ID7 / NONE, MEM SW1, MEM SW2, or MEM SW3

      NONE: No switches linked with key ID7

      MEM SW1: M1 switch linked with key ID7

      MEM SW2: M2 switch linked with key ID7

      MEM SW3: M3 switch linked with key ID7

      -
  2. ACTIVE TEST

    Tech Tips

    Using the intelligent tester to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.


    1. Turn the power switch off.

    2. Connect the intelligent tester to the DLC3.

    3. Turn the power switch on (IG).

    4. Turn the intelligent tester on.

    5. Enter the following menus: Body / Driver Seat / Active Test.

    6. Perform the Active Test according to the display on the intelligent tester.

      Driver Seat
      Tester Display Test Part Control Range Diagnostic Note
      Seat Reclining Seat reclining operation Front / OFF / Rear -
      Front Vertical Operation Seat front vertical operation Up / OFF / Down -
      Lifter Operation Seat lifter operation Up / OFF / Down -
      Seat Slide Operation Seat sliding operation Front / OFF / Rear -
      Buzzer Buzzer operation ON / OFF -
      Headrest Operating Headrest operation Up / OFF / Down -
    7. Enter the following menus: Body / Passenger Seat / Active Test.

    8. Perform the Active Test according to the display on the intelligent tester.

      Passenger Seat
      Tester Display Test Part Control Range Diagnostic Note
      Seat Reclining Seat reclining operation Front / OFF / Rear -
      Front Vertical Operation Seat front vertical operation Up / OFF / Down -
      Lifter Operation Seat lifter operation Up / OFF / Down -
      Seat Slide Operation Seat sliding operation Front / OFF / Rear -
      Buzzer Buzzer operation ON / OFF -
      Headrest Operating Headrest operation Up / OFF / Down -