DESCRIPTION
The front airbag sensor LH circuit consists of the center airbag sensor assembly and front airbag sensor LH.
The front airbag sensor LH detects impacts to the vehicle and sends signals to the center airbag sensor assembly to determine if the airbag should be deployed.
DTC B1615/14 is recorded when a malfunction is detected in the front airbag sensor LH.
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| B1615/14 |
|
|
WIRING DIAGRAM
INSPECTION PROCEDURE
PROCEDURE
CHECK FRONT AIRBAG SENSOR LH
| *1 | Front Airbag Sensor RH |
| *2 | Center Airbag Sensor Assembly |
Turn the power switch off.
Disconnect the cable from the negative (-) battery terminal.
Note
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
Interchange the front airbag sensor RH with LH and connect the connectors.
Connect the cable to the negative (-) battery terminal.
Turn the power switch on (IG), and wait for at least 60 seconds.
Clear the DTCs stored in the memory Click here.
Turn the power switch off.
Turn the power switch on (IG), and wait for at least 60 seconds.
Check for DTCs Click here.
| Result | ||||||||
|---|---|---|---|---|---|---|---|---|
|
Tech Tips
Codes other than DTC B1610/13 and B1615/14 may be output at this time, but they are not related to this check.
| B |
|
REPLACE CENTER AIRBAG SENSOR ASSEMBLY Click here |
| C |
|
REPLACE FRONT AIRBAG SENSOR LH Click here |
| A |
|
USE SIMULATION METHOD TO CHECK Click here