ACCESSORY METER INSTALLATION


  1. INSTALL ACCESSORY METER ASSEMBLY


    1. Connect each connector.

    2. A01NDLA

      Engage the 2 clips.

    3. Install the accessory meter assembly with the 3 screws.

  2. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL


    1. A01NF9W

      Engage the 2 clips as shown in the illustration.

    2. A01NE6V

      Engage the 2 clips and guide to install the center instrument cluster finish panel.

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. INSTALL REAR DECK FLOOR BOX


    1. A01NDSY

      Install the rear deck floor box with the 3 clips.