RELAY ON-VEHICLE INSPECTION


  1. INSPECT RUNNING LIGHT RELAY (PANEL)


    1. A01NEVEE86

      Remove the PANEL relay from the No. 1 relay block.

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 5 Voltage is not applied between terminals 1 and 2 10 kΩ or higher
      3 - 5 Voltage is applied between terminals 1 and 2 Below 1 Ω

      If the result is not as specified, replace the PANEL relay.