FRONT DOOR COURTESY SWITCH INSTALLATION


  1. INSTALL FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY


    1. A01NCSI

      Using a T30 "TORX" socket wrench, install the front door courtesy light switch assembly with the bolt.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

    2. Connect the connector.

  2. INSTALL LOWER CENTER PILLAR GARNISH


    1. A01NI0O

      Engage the 2 claws and the 5 clips to install the lower center pillar garnish LH.

  3. INSTALL REAR DOOR SCUFF PLATE


    1. A01NEW9

      Engage the 3 clips, guide and 6 claws, and install the rear door scuff plate LH.

  4. INSTALL COWL SIDE TRIM SUB-ASSEMBLY


    1. A01NFZB

      Engage the 2 clips to install the cowl side trim sub-assembly LH.

    2. Install the clip.

  5. INSTALL FRONT DOOR SCUFF PLATE


    1. w/ Illumination:


      1. Connect the connector.

    2. A01NHW7

      Engage the 4 clips, guide and 7 claws, and install the front door scuff plate LH.