PERSONAL LIGHT INSTALLATION


  1. INSTALL MAP LIGHT BULB


    1. Install the 2 map light bulbs to the 2 map light sockets.

    2. A01NDM0

      Turn the 2 map light bulbs and 2 map light sockets in the direction indicated by the arrows in the illustration and install them as a unit.

  2. INSTALL MAP LIGHT ASSEMBLY


    1. Connect each connector.

    2. A01NFAH

      Engage the 2 guides and 2 clips.

    3. Install the map light assembly with the 2 screws.

    4. A01NEGX

      Engage the 2 claws and connect the 2 caps.

    5. w/ Holder:


      1. Close the holder.

    6. w/o Holder:


      1. A01NCTO

        Engage the 2 claws to connect the cover.