PERSONAL LIGHT REMOVAL


  1. REMOVE MAP LIGHT ASSEMBLY


    1. w/ Holder:


      1. Open the holder.

    2. w/o Holder:


      1. A01NGWYE01
        Text in Illustration
        *1 Protective Tape

        Using a screwdriver wrapped with protective tape, disengage the 2 claws and disconnect the cover.

    3. A01NCSME01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver wrapped with protective tape, disengage the 2 claws and disconnect the 2 caps.

    4. A01NEKE

      Remove the 2 screws.

    5. Using a moulding remover, disengage the 2 clips and 2 guides.

    6. Disconnect each connector and remove the map light assembly.

  2. REMOVE MAP LIGHT BULB


    1. A01NDHW

      Turn the 2 map light bulbs and 2 map light sockets in the direction indicated by the arrows in the illustration and remove them as a unit.

    2. Remove the 2 map light bulbs from the 2 map light sockets.