LIGHTING SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Customize Setting / Illuminated Entry.

    5. Select the setting by referring to the table below.

      Illuminated Entry
      Tester Display Default Content Setting
      Lighting Time 15 s Changes the lighting time after closing all of the doors. (It will fade out immediately in case of turning the power switch from off to on (ACC or IG).) 7.5 s, 15 s or 30 s
      I/L when ACC OFF ON Lights up power switch illumination, front interior lights, rear interior light, footwell lights and scuff plate lights when the power switch is turned from on (ACC or IG) to off. ON or OFF
      I/L ON W/Door Key Unlock ON Lights up power switch illumination, front interior lights, rear interior light, footwell lights and scuff plate lights when doors are unlocked using a mechanical key or door control transmitter. ON or OFF
      Room Light when Aprchd ON Lights up the power switch illumination, front interior lights, rear interior light, footwell lights and scuff plate lights when a key enters any actuation area around the doors. ON or OFF
      Center Console Spot Light ON Lights up the center console spot light when power switch is turned on (ACC or IG) ON or OFF
      Interior Light Control ON Change the interior lights (power switch illumination, front interior lights, rear interior light, footwell lights and scuff plate lights) control. ON or OFF