ILLUMINATED ENTRY SYSTEM
The illuminated entry system has the following control functions:
| Control | Outline | Lights that Operate |
|---|---|---|
| Actuation Area-linked | When a registered key enters any actuation area around the doors, the lights that operate turn on*1. |
|
| When a registered key leaves all of actuation areas around the doors, the lights that operate turn off. |
|
|
| Door Lock/Unlock-linked | When any door is unlocked, the lights that operate turn on*1. |
|
| When all doors are locked, the lights that operate turn off. |
|
|
| Door Open/Close-linked | When any door is opened, the lights that operate turn on. |
|
| When all doors are closed, the lights that operate turn off. | ||
| Power Switch-linked | When the power switch is turned from on (ACC or IG) to off, the lights that operate turn on*1. |
|
| When the power switch is turned from off to on (ACC or IG) the light that operate turn off. |
|
|
| When the power switch is turned from off to on (ACC or IG) the light that operate turn on. |
|
|
| When the power switch is turned from on (ACC or IG) to off the light that operate turn off. |
|
|
| Delay | When approximately 15 seconds elapse after any of the following conditions are met, the lights that operate turn off.
|
|
| Battery Saving | When no changes occur in the condition of the doors for 20 minutes and a key is not in the actuation area, these lights turn off. |
|
Tech Tips
*1: The lights turn on with light adjustment state.