SECURITY INDICATOR LIGHT ASSEMBLY INSPECTION


  1. INSPECT SECURITY INDICATOR LIGHT


    1. A01NDRHE01
      Text in illustration
      *1

      Component with harness connected

      (Radio Receiver Assembly)

      Apply battery voltage from the wire harness back side between the specified terminals of the indicator, and check the lighting condition of the security indicator.

      Standard
      Measurement Condition Specified Condition

      Battery positive (+) → Terminals G8-7 (LP)

      Battery negative (-) → Terminals G8-9 (GND)

      		 Security indicator comes on

      If the result is not as specified, replace the radio receiver assembly.