ENGINE HOOD COURTESY SWITCH INSPECTION


  1. INSPECT ENGINE HOOD COURTESY SWITCH (for LHD)


    1. A01NGG9E01
      Text in illustration
      *1

      Component without harness connected

      (Hood Lock Assembly (Engine Hood Courtesy Switch))
      *2 Unlock
      *3 Lock

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      A9-1 (E) - A9-2 (+) Unlocked Below 1 Ω
      A9-1 (E) - A9-2 (+) Locked 10 kΩ or higher

      If the result is not as specified, replace the hood lock assembly.

  2. REMOVE ENGINE HOOD COURTESY SWITCH (for RHD)


    1. A01NCPGE01
      Text in illustration
      *1

      Component without harness connected

      (Hood Lock Assembly (Engine Hood Courtesy Switch))
      *2 Unlock
      *3 Lock

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      A9-1 (E) - A9-2 (+) Unlocked Below 1 Ω
      A9-1 (E) - A9-2 (+) Locked 10 kΩ or higher

      If the result is not as specified, replace the hood lock assembly.