ELECTRICAL KEY OSCILLATOR (for Center Floor) REMOVAL


  1. PRECAUTION

    Note

    After the power switch is turned off, the display and navigation module display (HDD navigation system) records various types of memory and settings. As a result, after turning the power switch off, make sure to wait at least 60 seconds before disconnecting the cable from the negative (-) battery terminal.

  2. REMOVE REAR DECK FLOOR BOX


    1. A01NDSY

      Remove the 3 clips and the rear deck floor box.

  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. REMOVE REAR SEAT HEADREST ASSEMBLY LH


    1. A01NGX5

      Press the headrest support button and pull up the headrest as shown in the illustration.

  5. REMOVE REAR SEAT OUTER TRACK BRACKET COVER LH


    1. A01NHXN

      Disengage the 4 claws and remove the rear seat outer track bracket cover LH.

  6. REMOVE REAR SEAT INNER TRACK BRACKET COVER LH


    1. A01NFLC

      Disengage the 4 claws and remove the rear seat inner track bracket cover LH.

  7. DISCONNECT REAR SEAT LOCK CABLE ASSEMBLY LH


    1. A01NDU1

      Remove the 4 clips.

    2. A01NDJG

      Remove the bolt.

    3. Disengage the guide and disconnect the No. 1 fold seat stopper band assembly.

    4. Pull down the adjuster lock piece to release the lock as shown in the illustration.

      A01NDSGE01
      Text in Illustration
      *1 Adjuster Spring *2 Lock Piece
    5. A01NE92E01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver wrapped with protective tape, disconnect the No. 2 reclining control cable as shown in the illustration.

    6. A01NDYY

      Remove the rear seat reclining control cable from the cover as shown in the illustration.

    7. Lift up the seat track adjusting handle to the uppermost position and hold the handle in this position as shown in the illustration.

      A01NHZ7E01
      Text in Illustration
      *1 Seat Track Adjusting Handle *2 Protective Tape

    8. Using a screwdriver wrapped with protective tape, disconnect the No. 2 rear seat reclining control cable as shown in the illustration.

    9. Using a screwdriver wrapped with protective tape, disconnect the rear seat lock cable assembly LH as shown in the illustration.

      A01NG9GE01
      Text in Illustration
      *1 Protective Tape

    10. When replacing the rear seat assembly LH or No. 2 rear seat reclining control cable with a new one:


      1. A01NEP9E01

        Cut portion A shown in the illustration to separate the rear seat assembly LH or No. 2 rear seat reclining control cable.

    11. When replacing the rear seat lock cable assembly LH with a new one:


      1. A01NDEKE01

        Cut portion A shown in the illustration to separate the rear seat lock assembly LH.

  8. REMOVE REAR SEAT ASSEMBLY LH


    1. A01NDMI

      Disconnect the connector.

    2. A01NGWM

      Remove the 3 bolts on the rear side of the seat.

    3. A01NEZD

      Remove the 2 bolts on the front side of the seat and the rear seat assembly LH.

      Note

      Be careful not to damage the vehicle body.

  9. REMOVE REAR SEAT HEADREST ASSEMBLY RH


    1. A01NGCA

      Press the headrest support button and pull up the headrest as shown in the illustration.

  10. REMOVE REAR SEAT CENTER HEADREST ASSEMBLY


    1. A01NHYA

      Press the headrest support button and pull up the headrest as shown in the illustration.

  11. REMOVE REAR SEAT OUTER TRACK BRACKET COVER RH


    1. A01NHX5

      Disengage the 4 claws and remove the rear seat track bracket cover RH.

  12. REMOVE REAR SEAT INNER TRACK BRACKET COVER RH


    1. A01NGSN

      Disengage the 4 claws and remove the 4 rear seat track bracket cover RH.

  13. DISCONNECT REAR SEAT LOCK CABLE ASSEMBLY RH


    1. A01NGJL

      Using a clip remover, remove the 2 clips and disconnect the rear seatback board sub-assembly.

    2. A01NEKF

      Using a clip remover, remove the 3 clips and disconnect the rear seatback board carpet assembly RH.

    3. A01NGPZ

      Remove the bolt.

    4. Disengage the guide and disconnect the No. 1 fold seat stopper band assembly.

    5. Pull down the adjusters lock piece to release the lock as shown in the illustration.

      A01NHFNE01
      Text in Illustration
      *1 Adjusters Spring *2 Lock Piece
    6. A01NE3UE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver wrapped with protective tape, disconnect the No. 1 reclining control cable as shown in the illustration.

    7. A01NHZA

      Remove the rear seat reclining control cable from the cover as shown in the illustration.

    8. Lift up the seat track adjusting handle to the uppermost position and hold the handle in this position as shown in the illustration.

      A01NFIEE01
      Text in Illustration
      *1 Seat Track Adjusting Handle *2 Protective Tape

    9. Using a screwdriver wrapped with protective tape, disconnect the No. 1 rear seat lock cable assembly as shown in the illustration.

    10. Using a screwdriver wrapped with protective tape, disconnect the rear seat lock cable assembly RH as shown in the illustration.

      A01NECJE01
      Text in Illustration
      *1 Protective Tape

    11. When replacing the rear seat assembly RH or rear seat reclining control cable with a new one:


      1. A01NEP9E01

        Cut portion A shown in the illustration to separate the rear seat assembly RH or rear seat reclining control cable.

    12. When replacing the rear seat lock cable assembly RH with a new one:


      1. A01NDEKE01

        Cut portion A shown in the illustration to separate the rear seat lock assembly RH.

  14. REMOVE REAR SEAT ASSEMBLY RH


    1. A01NCPO

      Disconnect the connector.

    2. A01NEWM

      Remove the 3 bolts on the rear side of the seat.

    3. A01NH4O

      Remove the 2 bolts on the front side of the seat and the rear seat assembly RH.

      Note

      Be careful not to damage the vehicle body.

  15. REMOVE AIR INTAKE COVER


    1. Remove the air intake cover LH.


      1. A01NH4EE02
        Text in Illustration
        *1 Protective Tape

        Release the claw by using a screwdriver with the tip taped, and remove its 2 hole covers.

      2. A01NDIZ

        Remove the 2 screws, then release the 2 claws and remove the air intake cover LH.

    2. Remove the air intake cover CTR.


      1. A01NGKPE01
        Text in Illustration
        *1 Protective Tape

        Release the claw by using a screwdriver with the tip taped, and remove its 2 hole covers.

      2. A01NG8X

        Remove the 2 screws, then release the 2 claws and remove the center air intake cover.

    3. Remove the air intake cover RH.


      1. A01NG83E04
        Text in Illustration
        *1 Protective Tape

        Release the claw by using a screwdriver with its tip taped, and remove the 2 hole covers.

      2. A01NGWJE01

        Remove the 2 screws, then release the 2 claws and remove the air intake cover RH.

  16. REMOVE ELECTRICAL KEY OSCILLATOR


    1. A01NHAJ

      Remove the 2 clips and turn over the floor carpet as shown in the illustration.

    2. A01NH41

      Disengage the 2 claws and remove the electrical key oscillator.

    3. Disconnect the connector.

      Note

      Be careful when removing the electrical key oscillator. If the oscillator is dropped, replace it with a new one.