THEFT DETERRENT SYSTEM (w/o Intrusion Sensor) DATA LIST / ACTIVE TEST


  1. DATA LIST

    Tech Tips

    Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

    Note

    In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body Electrical / Main Body / Data List.

    5. According to the display on the intelligent tester, read the Data List.

      Main Body
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      RR Door Courtesy SW Rear right door courtesy switch/ON or OFF

      ON: Rear right door open

      OFF: Rear right door closed

      		 -
      RL Door Courtesy SW Rear left door courtesy switch/ON or OFF

      ON: Rear left door open

      OFF: Rear left door closed

      		 -
      Back Door Courtesy SW Back door courtesy switch/ON or OFF

      ON: Back door open

      OFF: Back door closed

      		 -
      FR Door Lock Pos SW Front right door lock position switch/ON or OFF

      ON: Front right door unlocked

      OFF: Front right door locked

      		 -
      FR Door Courtesy SW Front right door courtesy switch/ON or OFF

      ON: Front right door open

      OFF: Front right door closed

      		 -
      FL Door Lock Pos SW Front left door lock position switch/ON or OFF

      ON: Front left door unlocked

      OFF: Front left door locked

      		 -
      FL Door Courtesy SW Front left door courtesy switch/ON or OFF

      ON: Front left door open

      OFF: Front left door closed

      		 -
      Hood Courtesy SW Engine hood courtesy signal/ON or OFF

      ON: Engine hood open

      OFF: Engine hood closed

      		 -
      RR-Door Lock Pos SW Rear right door lock position switch/ON or OFF

      ON: Rear right door unlocked

      OFF: Rear right door locked

      		 -
      RL-Door Lock Pos SW Rear left door lock position switch/ON or OFF

      ON: Rear left door unlocked

      OFF: Rear left door locked

      		 -

  2. ACTIVE TEST

    Tech Tips

    Using the intelligent tester to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body Electrical / Main Body / Active Test.

    5. According to the display on the intelligent tester, perform the Active Test.

      Main Body
      Tester Display Test Part Control Range Diagnostic Note
      Hazard Hazard warning lights ON / OFF -
      Vehicle Horn Vehicle horns ON / OFF -
      Security Indicator Security indicator ON / OFF -
      Security Horn2*1 Theft warning siren ON / OFF -
      Security Horn*2 Security horn ON / OFF -

      • *1: w/ Theft Warning Siren

      • *2: w/ Security Horn