INTRUSION SENSOR REMOVAL


  1. REMOVE MAP LIGHT ASSEMBLY


    1. w/ Holder:


      1. Open the holder.

    2. w/o Holder:


      1. A01NGWYE01
        Text in Illustration
        *1 Protective Tape

        Using a screwdriver wrapped with protective tape, disengage the 2 claws and disconnect the cover.

    3. A01NCSME01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver wrapped with protective tape, disengage the 2 claws and disconnect the 2 caps.

    4. A01NEKE

      Remove the 2 screws.

    5. Using a moulding remover, disengage the 2 clips and 2 guides.

    6. Disconnect each connector and remove the map light assembly.

  2. REMOVE THEFT WARNING RADAR SENSOR


    1. A01NFBF

      Disconnect the connector.

    2. Disengage the clamp.

    3. A01NHAF

      Remove the screw and gear.

    4. A01NFM6

      Remove the cover as shown in the illustration.

    5. A01NHMN

      Remove the 6 screws and theft warning radar sensor.