ENGINE IMMOBILISER SYSTEM SYSTEM DESCRIPTION


  1. ENGINE IMMOBILISER SYSTEM DESCRIPTION

    The immobiliser system is a theft deterrent system that determines whether to disable starting of the hybrid vehicle control system based on a comparison of the key ID code and the vehicle pre-registered code. The immobiliser system compares the certification ECU (smart key ECU assembly) preregistered ID code with the ID of the key-embedded transponder chip. If the ID codes do not match, the immobiliser system is activated and the hybrid vehicle control system cannot be started.

  2. FUNCTION OF MAIN COMPONENTS

    Component Outline
    Transponder key coil/amplifier (built into the power switch)

    • Informs the driver of any power source or system abnormality through the illumination stage of the indicator light.

    • Receives the ID code and transmits it to the certification ECU (smart key ECU assembly) when the key battery is too weak to respond to the tuner based on signals from the room oscillators.
    Key Receives the signals from the oscillators and returns the ID code to the door control receiver.
    Steering lock ECU (steering lock actuator assembly) Receives the steering unlock/lock signal from the certification ECU (smart key ECU assembly), and activates the steering lock motor.
    Certification ECU (smart key ECU assembly)

    • Certifies the ID code received from the door control receiver and transmits the certification results to the steering lock ECU (steering lock actuator assembly).

    • Transmits the steering lock/unlock signals.

    • Transmits the engine immobiliser set/unset request signals.
    ID code box (immobiliser code ECU) Receives the steering unlock or immobiliser disengage signals from the certification ECU (smart key ECU assembly), certifies them, and transmits each disengage signal to the steering lock ECU (steering lock actuator assembly) or hybrid vehicle control ECU.
    Power management control ECU (HV CPU) Receives the signal from the certification ECU (smart key ECU assembly), and performs hybrid vehicle control system.

    Indoor electrical key oscillator


    • Front, Center, Rear

    Transmits key detection signals within the detection area in the cabin upon receiving a transmission request signal from the certification ECU (smart key ECU assembly).

    A certification ECU (smart key ECU assembly) request signal is activated when the key is brought into the cabin and the power switch is pushed or brake pedal is depressed.
    Door control receiver Receives an ID code from the key in the detection area and transmits it to the certification ECU (smart key ECU assembly).

    Radio receiver assembly


    • Security indicator light

    Illuminates or flashes.

    Illumination is controlled by the certification ECU (smart key ECU assembly).