ENTRY AND START SYSTEM (for Start Function) DTC CHECK / CLEAR


  1. CHECK DTC


    1. Connect the intelligent tester to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Power Source Control / DTC.

    5. Read the DTC by following the prompts on the intelligent tester screen.

      Tech Tips

      Refer to the intelligent tester operator's manual for further details.

  2. CLEAR DTC


    1. Connect the intelligent tester to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Power Source Control / DTC.

    5. Clear the DTC by following the directions on the intelligent tester screen.

      Tech Tips

      Refer to the intelligent tester operator's manual for further details.