ENTRY AND START SYSTEM (for Start Function) CUSTOMIZE PARAMETERS


  1. CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER

    Tech Tips

    The items in the table below can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current setting before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Entry & Start / Utility / Customize Setting.

    5. Select the setting by referring to the table below.

      Entry & Start
      Tester Display Default Content Setting
      Ignition Available Area (Entry ignition available area) All Function to choose the available area for electrical key to start the hybrid control system and cancel the steering lock. Front or All
      Key Low Battery Warning ON Function to warn driver that the key battery is low. ON or OFF

  2. CUSTOMIZING FUNCTION WITHOUT INTELLIGENT TESTER

    Performing the following procedure disables the entry and start system.

    Tech Tips

    To start the hybrid control system while the entry and start system is disabled, follow the procedure for when the key battery is low Click here.


    1. The operation procedures are as follows:

      Precondition:

      Power switch off, driver side door closed and unlocked.


      1. Push the unlock switch of the key once.

      2. Open the driver door within 5 seconds.

      3. Push the unlock switch of the key twice within 5 seconds.

      4. Close and open the driver door twice within 30 seconds.

        (Driver door: Close → Open → Close → Open)

      5. Push the unlock switch of the key twice within 5 seconds.

      6. Close and open the driver door within 30 seconds.

        (Driver door: Close → Open)

      7. Close the driver door within 5 seconds.

        When electrical key cancel is activated, the wireless door lock buzzer sounds twice.

        To return to the original condition, perform the procedures again. When the original condition is returned, the wireless door lock buzzer sounds once.