DESCRIPTION
The entry and start system uses the wireless door lock buzzer assembly to perform various vehicle exterior warnings. When the conditions for each warning are met, the certification ECU (smart key ECU assembly) sends a buzzer request signal to the main body ECU (multiplex network body ECU) via CAN communication. The wireless door lock assembly sounds the buzzer according to the signal from the main body ECU (multiplex network body ECU).
INSPECTION PROCEDURE
Note
The entry and start system (for entry function) uses a multiplex communication system (LIN communication system) and CAN communication system. Inspect the communication function by following How to Proceed with Troubleshooting Click here. Troubleshoot the entry and start system (for entry function) after confirming that the communication system is functioning properly.
PROCEDURE
READ VALUE USING INTELLIGENT TESTER (ANSWER-BACK BUZZER FUNCTION)
Connect the intelligent tester to the DLC3.
Turn the power switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Body / Main Body / Data List.
Read the Data List according to the display on the intelligent tester.
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
|---|---|---|---|
| Wireless Buzzer Resp | Answer-back buzzer operation / ON or OFF | Customization status displayed | - |
| Result | ||||||
|---|---|---|---|---|---|---|
|
| B |
|
PERFORM CUSTOMIZE SETTING (Proceed to Customize Parameters) Click here |
| A |
|
PERFORM ACTIVE TEST USING INTELLIGENT TESTER
Enter the following menus: Body / Main Body / Active Test.
Perform the Active Test according to the display on the intelligent tester.
| Tester Display | Test Part | Control Range | Diagnostic Note |
|---|---|---|---|
| Wireless Buzzer | Wireless door lock buzzer assembly | ON/OFF | - |
| OK |
|---|
| Wireless door lock buzzer sounds. |
| NG |
|
GO TO WIRELESS DOOR LOCK CONTROL SYSTEM (Proceed to No Answer-Back) Click here |
| OK |
|
REPLACE CERTIFICATION ECU (SMART KEY ECU ASSEMBLY)