REAR DOOR LOCK INSPECTION


  1. INSPECT REAR DOOR LOCK ASSEMBLY LH


    1. A01NE31E08
      Text in Illustration
      *1

      Component without harness connected

      (Rear Door Lock Assembly LH)
      *2 Lock
      *3 Unlock

      Check the operation of the door lock motor and double lock motor.


      1. Apply auxiliary battery voltage and check the operation of the door lock motor and double lock motor.

        OK
        Connection Result

        Auxiliary battery positive (+) → 2 (L)

        Auxiliary battery negative (-) → 1 (UL)

        		 Locks

        Auxiliary battery positive (+) → 1 (UL)

        Auxiliary battery negative (-) → 2 (L)

        		 Unlocks

        Auxiliary battery positive (+) → 4 (DL)

        Auxiliary battery negative (-) → 3 (UNDL)

        		 Sets

        Auxiliary battery positive (+) → 3 (UNDL)

        Auxiliary battery negative (-) → 4 (DL)

        		 Unsets

        Tech Tips


        • Move the door lock motor to the lock position and set the double locking system. Check that the doors cannot be unlocked by operating the control cable.

        • Move the door lock motor to the lock position and unset the double locking system. Check that the doors can be unlocked by operating the control cable.

        If the result is not as specified, replace the rear door lock assembly LH.

    2. A01NE31E09
      Text in Illustration
      *1

      Component without harness connected

      (Rear Door Lock Assembly LH)
      *2 Lock
      *3 Unlock

      Check the operation of the unlock detection switch and double lock position switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Door Lock Condition Specified Condition
        5 (LSSR) - 6 (E) Locked 10 kΩ or higher
        5 (LSSR) - 6 (E) Unlocked Below 1 Ω
        9 (DLSR) - 10 (E) Unset 10 kΩ or higher
        9 (DLSR) - 10 (E) Set Below 1 Ω

        If the result is not as specified, replace the rear door lock assembly LH.

  2. INSPECT REAR DOOR LOCK ASSEMBLY RH


    1. A01NFTJE05
      Text in Illustration
      *1

      Component without harness connected

      (Rear Door Lock Assembly RH)
      *2 Unlock
      *3 Lock

      Check the operation of the door lock motor and double lock motor.


      1. Apply auxiliary battery voltage and check the operation of the door lock motor and double lock motor.

        OK
        Connection Result

        Auxiliary battery positive (+) → 4 (L)

        Auxiliary battery negative (-) → 3 (UL)

        		 Locks

        Auxiliary battery positive (+) → 3 (UL)

        Auxiliary battery negative (-) → 4 (L)

        		 Unlocks

        Auxiliary battery positive (+) → 2 (DL)

        Auxiliary battery negative (-) → 1 (UNDL)

        		 Sets

        Auxiliary battery positive (+) → 1 (UNDL)

        Auxiliary battery negative (-) → 2 (DL)

        		 Unsets

        Tech Tips


        • Move the door lock motor to the lock position and set the double locking system. Check that the doors cannot be unlocked by operating the control cable.

        • Move the door lock motor to the lock position and unset the double locking system. Check that the doors can be unlocked by operating the control cable.

        If the result is not as specified, replace the rear door lock assembly RH.

    2. Check the operation of the unlock detection switch and double lock position switch.


      1. A01NFTJE06
        Text in Illustration
        *1

        Component without harness connected

        (Rear Door Lock Assembly RH)
        *2 Unlock
        *3 Lock

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Door Lock Condition Specified Condition
        9 (LSSR) - 10 (E) Locked 10 kΩ or higher
        9 (LSSR) - 10 (E) Unlocked Below 1 Ω
        5 (DLSR) - 6 (E) Unset 10 kΩ or higher
        5 (DLSR) - 6 (E) Set Below 1 Ω

        If the result is not as specified, replace the rear door lock assembly RH.