ENTRY AND START SYSTEM (for Entry Function) DATA LIST / ACTIVE TEST


  1. DATA LIST

    Tech Tips

    Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

    Note

    In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Entry & Start, Main Body or Back Door* / Data List.

      *: w/ Power Back Door System

    5. Read the Data List according to the display on the intelligent tester.

      Entry & Start (Certification ECU (Smart Key ECU Assembly))
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      D-Door Touch Sensor Driver side door touch sensor / ON or OFF

      ON: Touch sensor touched

      OFF: Touch sensor not touched

      		 -
      P-Door Touch Sensor Front passenger side door touch sensor / ON or OFF

      ON: Touch sensor touched

      OFF: Touch sensor not touched

      		 -
      D-Door Trigger Switch Driver side door lock sensor / ON or OFF

      ON: Entry lock sensor touched

      OFF: Entry lock sensor not touched

      		 -
      P-Door Trigger Switch Front passenger side door lock sensor / ON or OFF

      ON: Entry lock sensor touched

      OFF: Entry lock sensor not touched

      		 -
      Tr/B-Door Lock SW Back door opener switch assembly (lock switch) / ON or OFF

      ON: Back door opener switch assembly (lock switch) pushed

      OFF: Back door opener switch assembly (lock switch) not pushed

      		 -
      Tr/B-Door Unlock SW Back door opener switch assembly (opener switch) / ON or OFF

      ON: Back door opener switch assembly (opener switch) pushed

      OFF: Back door opener switch assembly (opener switch) not pushed

      		 -
      Ignition Switch Power switch on (IG) / ON or OFF

      ON: Power switch on (IG)

      OFF: Power switch off

      		 -
      Unmatched Vehicle-ID Communication condition between vehicle and key (vehicle-ID) / Yes or No

      Yes: Key ID code not matched to vehicle

      No: Key ID code matched to vehicle

      		 -
      No Response Communication condition between vehicle and key (response) / Yes or No

      Yes: Key ID code not matched to vehicle

      No: Key ID code matched to vehicle

      		 -
      Unmatch Code or Form Communication condition between vehicle and key (response code and format) / Yes or No

      Yes: Key ID code not matched to vehicle

      No: Key ID code matched to vehicle

      		 -
      Key Low Battery Low key battery / Yes or No

      Yes: Key battery voltage low

      No: Key battery voltage normal

      		 -
      Power Save Cnt 10 Min Power save counter - 10 minutes / Min: 0; Max: 255 Within range from 0 to 255 -
      Power Save Cnt 5 Day Power save counter - 5 days / Min: 0; Max: 255 Within range from 0 to 255 -
      Power Save Cnt 14 Day Power save counter - 14 days / Min: 0; Max: 255 Within range from 0 to 255 -
      ID Code Difference(Resp) Communication condition between vehicle and key (ID code) / Yes or No

      Yes: Key ID code not matched to vehicle

      No: Key ID code matched to vehicle

      		 -
      C Code Difference Communication condition between vehicle and key (challenge code) / Yes or No

      Yes: Key ID code not matched to vehicle

      No: Key ID code matched to vehicle

      		 -
      Auto Entry Cancel SW Entry function cancel / ON or OFF Mode status displayed -
      Ignition Available Area Ignition available area / Front or All Customization status displayed -
      Parking Wait Time Parking wait time / 0.5s, 1.5s, 2.5s or 5s Customization status displayed -
      B-Dr Opening Operation Back door opening operation / Long, Twice, OFF Customization status displayed -
      Key Low Battery Warning Low key battery warning / ON or OFF Customization status displayed -
      Main Body (Main Body ECU (Multiplex Network Body ECU))
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      ACC SW Power switch on (ACC) / ON or OFF

      ON: Power switch on (ACC)

      OFF: Power switch off

      		 -
      IG SW Power switch on (IG) / ON or OFF

      ON: Power switch on (IG)

      OFF: Power switch off

      		 -
      RR Door Courtesy SW Rear door courtesy light switch RH signal / ON or OFF

      ON: Rear door RH open

      OFF: Rear door RH closed

      		 -
      RL Door Courtesy SW Rear door courtesy light switch LH signal / ON or OFF

      ON: Rear door LH open

      OFF: Rear door LH closed

      		 -
      Back Door Courtesy SW* Back door courtesy light switch signal / ON or OFF

      ON: Back door open

      OFF: Back door closed

      		 -
      FR Door Lock Pos SW Front door lock position switch RH signal / ON or OFF

      ON: Front door RH unlocked

      OFF: Front door RH locked

      		 -
      FR Door Courtesy SW Front door courtesy light switch RH signal / ON or OFF

      ON: Front door RH open

      OFF: Front door RH closed

      		 -
      FL Door Lock Pos SW Front door lock position switch LH signal / ON or OFF

      ON: Front door LH unlocked

      OFF: Front door LH locked

      		 -
      FL Door Courtesy SW Front door courtesy light switch LH signal / ON or OFF

      ON: Front door LH open

      OFF: Front door LH closed

      		 -
      PR-Door Lock Pos SW Rear RH side rear door lock position switch signal / ON or OFF

      ON: Rear RH side rear door unlocked

      OFF: Rear RH side rear door locked

      		 -
      RL-Door Lock Pos SW Rear LH side rear door lock position switch signal / ON or OFF

      ON: Rear LH side rear door unlocked

      OFF: Rear LH side rear door locked

      		 -

      *: w/o Power Back Door System

      Back Door (Power Back Door ECU (Power Back Door Motor Unit))*
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      Courtesy SW Back door courtesy switch signal/ON or OFF

      ON: Back door open

      OFF: Back door closed

      		 -

      *: w/ Power Back Door System

  2. ACTIVE TEST

    Tech Tips

    Using the intelligent tester to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Entry & Start or Main Body / Active Test.

    5. Perform the Active Test according to the display on the intelligent tester.

      Entry & Start (Certification ECU (Smart Key ECU Assembly))
      Tester Display Test Part Control Range Diagnostic Note
      Overhead Tuner Power Supply ON Door control receiver assembly ON/OFF -
      Main Body (Main Body ECU (Multiplex Network Body ECU))
      Tester Display Test Part Control Range Diagnostic Note
      Trunk and Back-door Open Back door lock motor ON/OFF -