WIRELESS DOOR LOCK CONTROL SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.

  2. CUSTOMIZE


    1. Connect the intelligent tester to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Main Body or Illuminated Entry / Utility / Customize.

    5. Select the setting by referring to the table below.

    Wireless Door Lock Control System
    Display (item) Default Function Setting
    Wireless Control ON Function that turns wireless door lock / ON or OFF ON or OFF
    Hazard Answer Back ON

    When the doors are locked by wireless operation, the hazard warning lights flash once.

    When the doors are unlocked by wireless operation, the hazard warning lights flash twice.

    		 ON or OFF
    Open Door Warning*1 ON The buzzer sounds when lock is pressed when any of the doors are ajar. ON or OFF
    Unlock 2 Operation ON*2 or OFF*3 Function that unlocks driver door when unlock switch on transmitter is pressed once, and unlocks all doors when pressed twice. If setting is OFF, pressing unlock switch once makes all doors unlock. ON or OFF
    Panic Function*4 ON Function to operate theft deterrent system by continuously pressing panic switch on transmitter for 0.8 seconds ON or OFF
    Auto Lock Time 30 s Function that regulates the interval between unlocking and automatic relocking of doors 30 s, 60 s or 120 s
    Wireless Buzzer Resp*5 ON Wireless door lock buzzer response / ON or OFF ON or OFF
    P/W Wireless Ope Buzz*6 ON Wireless power window buzzer response / ON or OFF ON or OFF
    Wireless Buzzer Vol*1 Level7 Wireless door lock buzzer Volume Level7, Level6, Level5, Level4, Level3, Level2, Level1 or Level0

    • *1: w/ Door ajar warning function

    • *2: for GCC and Australia

    • *3: except for GCC and Australia

    • *4: w/ Panic function

    • *5: w/ Wireless buzzer answer back function

    • *6: w/ Wireless power window buzzer response function

    Illuminated Entry
    Display Default Content Setting
    Lighting Time 15 s Changes the lighting time after closing all doors. (It will quickly fade out in case of turning the power switch from off to on (ACC or IG).) 7.5 s, 15 s or 30 s