FRONT DOOR LOCK INSPECTION


  1. INSPECT FRONT DOOR LOCK ASSEMBLY LH


    1. A01NE0GE04
      Text in Illustration
      *1

      Component without harness connected

      (Front Door Lock Assembly LH)
      *2 Unlock
      *3 Lock

      Check the operation of the door lock motor and double lock motor.


      1. Apply auxiliary battery voltage and check the operation of the door lock motor and double lock motor.

        OK
        Connection Result

        Auxiliary battery positive (+) → 4 (L)

        Auxiliary battery negative (-) → 3 (UL)

        		 Locks

        Auxiliary battery positive (+) → 3 (UL)

        Auxiliary battery negative (-) → 4 (L)

        		 Unlocks

        Auxiliary battery positive (+) → 2 (DL)

        Auxiliary battery negative (-) → 1 (UNDL)

        		 Sets

        Auxiliary battery positive (+) → 1 (UNDL)

        Auxiliary battery negative (-) → 2 (DL)

        		 Unsets

        Tech Tips


        • Move the door lock motor to the lock position and set the double locking system. Check that the doors cannot be unlocked by operating the control cable.

        • Move the door lock motor to the lock position and unset the double locking system. Check that the doors can be unlocked by operating the control cable.

        If the result is not as specified, replace the front door lock assembly LH.

    2. A01NE0GE03
      Text in Illustration
      *1

      Component without harness connected

      (Front Door Lock Assembly LH)
      *2 Unlock
      *3 Lock

      Check the operation of the door unlock detection switch and double lock position switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Door Lock Condition Specified Condition
        7 (E) - 8 (LSSR) Locked 10 kΩ or higher
        7 (E) - 8 (LSSR) Unlocked Below 1 Ω
        5 (E) - 6 (DLSR) Unset 10 kΩ or higher
        5 (E) - 6 (DLSR) Set Below 1 Ω

        If the result is not as specified, replace the front door lock assembly LH.

    3. A01NHDVE01
      Text in Illustration
      *1

      Component without harness connected

      (Front Door Lock Assembly LH)
      *2 Lock
      *3 off
      *4 Unlock

      Check the operation of the door key lock and unlock switch. (for LHD)


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Key Cylinder Condition Specified Condition
        7 (E) - 9 (L) Locked Below 1 Ω
        7 (E) - 9 (L) off 10 kΩ or higher
        7 (E) - 10 (UL) Unlocked Below 1 Ω
        7 (E) - 10 (UL) off 10 kΩ or higher

        If the result is not as specified, replace the front door lock assembly LH.

  2. INSPECT FRONT DOOR LOCK ASSEMBLY RH


    1. A01NHMTE01
      Text in Illustration
      *1

      Component without harness connected

      (Front Door Lock Assembly RH)
      *2 Unlock
      *3 Lock

      Check the operation of the door lock motor and double lock motor.


      1. Apply auxiliary battery voltage and check the operation of the door lock motor and double lock motor.

        OK
        Connection Result

        Auxiliary battery positive (+) → 2 (L)

        Auxiliary battery negative (-) → 1 (UL)

        		 Locks

        Auxiliary battery positive (+) → 1 (UL)

        Auxiliary battery negative (-) → 2 (L)

        		 Unlocks

        Auxiliary battery positive (+) → 4 (DL)

        Auxiliary battery negative (-) → 3 (UNDL)

        		 Sets

        Auxiliary battery positive (+) → 3 (UNDL)

        Auxiliary battery negative (-) → 4 (DL)

        		 Unsets

        Tech Tips


        • Move the door lock motor to the lock position and set the double locking system. Check that the doors cannot be unlocked by operating the control cable.

        • Move the door lock motor to the lock position and unset the double locking system. Check that the doors can be unlocked by operating the control cable.

        If the result is not as specified, replace the front door lock assembly RH.

    2. A01NHMTE02
      Text in Illustration
      *1

      Component without harness connected

      (Front Door Lock Assembly RH)
      *2 Unlock
      *3 Lock

      Check the operation of the door unlock detection switch and double lock position switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Door Lock Condition Specified Condition
        7 (LSSR) - 8 (E) Locked 10 kΩ or higher
        7 (LSSR) - 8 (E) Unlocked Below 1 Ω
        9 (DLSR) - 10 (E) Unset 10 kΩ or higher
        9 (DLSR) - 10 (E) Set Below 1 Ω

        If the result is not as specified, replace the front door lock assembly RH.

    3. A01NF00E02
      Text in Illustration
      *1

      Component without harness connected

      (Front Door Lock Assembly RH)
      *2 Lock
      *3 off
      *4 Unlock

      Check the operation of the door key lock and unlock switch. (for RHD)


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Key Cylinder Condition Specified Condition
        6 (L) - 8 (E) Locked Below 1 Ω
        6 (L) - 8 (E) off 10 kΩ or higher
        5 (UL) - 8 (E) Unlocked Below 1 Ω
        5 (UL) - 8 (E) off 10 kΩ or higher

        If the result is not as specified, replace the front door lock assembly RH.