POWER DOOR LOCK CONTROL SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Utility / Customize Setting.

    5. Select the setting by referring to the table below.

      Door Lock
      Display Default Content Setting
      Unlock Key Twice

      OFF

      ON*

      		 Function that unlocks only the driver door when the driver door key cylinder is turned to unlock once, and unlocks all doors when it is turned to unlock twice. For the OFF setting, turning it once unlocks all doors. ON or OFF
      Auto Lock ON Function that locks all doors when the vehicle speed reaches a certain level. ON or OFF
      Auto Lock/Shift OFF Function that locks all doors when the shift lever is moved from P to any position other than P while the engine is running and all doors are closed. ON or OFF
      Auto Unlock/Shift OFF Function that unlocks all doors when the shift lever is moved to P from any position other than P while the power switch is on (IG). ON or OFF
      All Unlock/Open-Close OFF Function that unlocks the other doors when the driver door is opened within 10 seconds after the power switch is turned off. ON or OFF

      *: Models with 1500 kg (3307 lb) towing capacity

      Illuminated Entry
      Display Default Content Setting
      Lighting Time 15 s Function that changes the lighting time after closing all doors. (It will quickly fade out in case of turning the power switch from off to on (ACC) or on (IG).) 7.5 s, 15 s or 30 s