POWER DOOR LOCK CONTROL SYSTEM OPERATION CHECK

CHECK POWER DOOR LOCK OPERATION

1. Check basic functions.

   
   

   1. Check that all doors lock when the lock side of the door control switch (for manual operation) is pressed, and all doors unlock when the unlock side is pressed.

   2. Check that all doors lock when the driver door lock key cylinder is turned to lock using the key.

   3. Check that all doors unlock when the driver door lock key cylinder is turned to unlock using the key.

2. Check the key lock-in prevention function.

   Note

   In order to prevent the key from being locked in, the following inspection should be performed with the driver door window open.

   
   

   1. Turn the power switch on (IG) or (ACC).

   2. With the driver door open, check that all doors unlock immediately after the door lock knob for the driver door is locked.

   3. With the driver door open, check that all doors unlock immediately after the lock side of the door control switch (for manual operation) is pressed.

   4. With the driver door open, lock the driver door lock knob and hold it for 2 seconds or more, then close the driver door and check that all doors unlock.

3. Check the security function of the door lock control system.

   
   

   1. Close all doors and leave the driver door window open so that the door control switch can be operated from outside the vehicle. (Step 1)

   2. Open the driver door and remove the key from the vehicle. With the door still open, lock the door using the lock knob. Hold the outside handle of the driver door open and close the door while holding the handle open (confirm that the lock knob remained in the lock position). Then, check that the doors do not unlock when the unlock side of the door control switch (for manual operation) is pressed from outside the vehicle.

   3. Starting from Step 1, with the key outside the vehicle, close and lock the driver door using the mechanical key. Then, check that the doors do not unlock when the unlock side of the door control switch (for manual operation) is pressed from outside the vehicle.

   4. Starting from Step 1, with the key outside the vehicle, close and lock the driver door using wireless door lock or entry lock operation. Then, check that the doors do not unlock when the unlock side of the door control switch (for manual operation) is pressed from outside the vehicle.

      Tech Tips

      Check that the security function of the door lock control system is canceled under the following conditions:

      
      

      • The power switch is turned on (IG).

      • The driver side is unlocked using the key.

      • The unlock side of the door control switch (for manual operation) is pressed after the door lock knob is unlocked manually.

      • The doors are unlocked by wireless operation.

4. Check the illumination function.

   
   

   1. Set the map light switch to the door position.

   2. When the driver door is unlocked by the key linked or wireless operation with the power switch on (IG) and all doors closed and locked, check that the roof light comes on.

   3. Check that the interior light turns off in approximately 15 seconds* if the doors have not been opened.

      Tech Tips

      *: This function can be customized Click here.

5. Check the key-linked 2-step unlock function.

   Tech Tips

   The default setting for models without 1500 kg (3307 lb) towing capacity is OFF. If necessary, the function must be set to ON through the customize function.

   
   

   1. Lock all doors.

   2. Check that only the driver door unlocks when the driver door lock cylinder is turned to unlock once using the key and other doors unlock when turned to unlock consecutively once again.

6. Check the driver door-linked automatic door unlock function.

   Tech Tips

   The default setting is OFF. If necessary, the function must be set to ON through the customize function.

   
   

   1. When the driver door is closed, turning the power switch from on (IG) to off and opening the driver door within 10 seconds will automatically unlock all doors.

7. Check the shift linked automatic door lock function.

   Tech Tips

   
   

   • The default setting is OFF. If necessary, the function must be set to ON through the customize function.

   • The automatic locking operation is disabled if the crash detection sensor (built into the center airbag sensor) unlocking system malfunctions when the power switch is on (IG) and all doors are closed.

   
   

   1. When the power switch is on (IG) and the shift lever is moved from P to any position other than P, check that all doors lock automatically.

8. Check the shift linked automatic door unlock function.

   Tech Tips

   The default setting is OFF. If necessary, the function must be set to ON through the customize function.

   
   

   1. When the power switch is on (IG) and the shift lever is moved to P from any position other than P, check that all doors unlock automatically.

9. Check the speed-sensitive automatic door lock function.

   Tech Tips

   The automatic locking operation is disabled if the crash detection sensor (built into the center airbag sensor) unlocking system has a malfunction when the power switch is on (IG) and all doors are closed.

   
   

   1. When any door is unlocked and the vehicle is driven at approximately 20 km/h (12 mph) or more, check that all doors automatically lock at once (automatic door lock).

CHECK DOUBLE LOCK FUNCTION

1. Check that the double locking function is set by using the wireless door lock operation.

   
   

   1. Open all the windows.

   2. Turn the power switch off.

   3. Open and close the driver door, and make sure that all doors including the back door are closed securely.

   4. Press the transmitter lock switch twice within 5 seconds, and check that the hazard warning lights flash once as an answer back.

   5. Try to unlock all doors with the inside handle of the vehicle, and check that none of the doors unlock.

2. Check that the double locking function is set by using the entry lock operation.

   
   

   1. Open all the windows.

   2. Turn the power switch off.

   3. Open and close the driver door, and make sure that all doors including the back door are closed securely.

   4. Touch the lock sensor on the outside door handle with holding the key within 5 seconds, and check that the hazard warning lights flash once as an answer back.

   5. Try to unlock all doors with the inside handle of the vehicle, and check that none of the doors unlock.

3. Check that the double locking function is canceled.

   
   

   1. Unlock the door by using the wireless unlock operation or entry unlock operation while the double locking function is set, and check that the hazard warning lights flash twice as an answer back.

   2. Check that the doors can be opened both by the inside handle and the outside handle.

      Tech Tips

      If the transmitter battery is depleted, only the driver door can be opened using the key. However, the theft deterrent system still remains on. The theft alarm will sound when the door is opened without using the transmitter.