POWER MANAGEMENT CONTROL ECU (for LHD) REMOVAL


  1. REMOVE DRIVER SIDE KNEE AIRBAG ASSEMBLY

    Click here

  2. REMOVE INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY


    1. A01NEFZ

      Disconnect the 4 connectors.

    2. A01NEF4E02

      Disengage the 2 claws as shown in the illustration and disconnect the 2 connectors (A).

    3. Disconnect the 4 connectors (B).

    4. A01NDZ1

      Remove the 2 nuts.

    5. A01NHWT

      Disengage the claw as shown in the illustration and disconnect the connector.

    6. A01NE8M

      Disengage the 2 claws and release the connector lock as shown in the illustration.

    7. A01NCP0

      Disengage the claw as shown in the illustration and disconnect the connector and remove the instrument panel junction block assembly.

  3. REMOVE POWER MANAGEMENT CONTROL ECU


    1. A01NCR2

      Remove the 2 nuts and power management control ECU.