SIDE MONITOR SYSTEM DTC CHECK / CLEAR


  1. CHECK DTC


    1. Connect the intelligent tester to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Chassis / Parking Assist Monitor System / DTC.

    5. Check the details of the DTCs Click here.

      Tech Tips

      Parking assist ECU may output the DTCs of the following system. If DTCs other than those specified in Diagnostic Trouble Code Chart of the side monitor system are output, refer to Diagnostic Trouble Code Chart for the applicable system.

      System Proceed to
      Parking assist monitor system

      Click here

  2. CLEAR DTC


    1. Connect the intelligent tester to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the intelligent tester on.

    4. Operate the intelligent tester to clear the codes. Enter the following menus: Chassis / Parking Assist Monitor System / DTC.

    5. According to the display on the intelligent tester, select the trouble code data display with the clear button.