LEXUS PARKING ASSIST-SENSOR SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZE PARAMETERS (Using Intelligent Tester)

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the Lexus parking assist-sensor system on.

    4. Turn the intelligent tester on.

    5. Enter the following menus: Body / Clearance Sonar / Utility / Customize Setting.

    6. Select the setting by referring to the table below.

      Warning
      Display Default Content Setting
      Rr Sensor Onset Range Wide Set the buzzer activation range for the rear center sensors.

      Narrow or Wide


      • Narrow: 600 mm (23.62 in.)

      • Wide: 1500 mm (59.06 in.)
      Keep Sense Buzzer Avail Make the buzzer sound when the distance between the vehicle and obstacle does not change for more than 3 seconds.

      Not Avail or Avail


      • Not Avail: Not Available

      • Avail: Available
      Fr & Rr Buzzer Volume M2 Change the buzzer volume setting.

      L, M1, M2, M3 or H


      • L: Low volume

      • M1: Medium low volume

      • M2: Medium volume

      • M3: Medium high volume

      • H: High volume
      Sensor
      Display Default Content Setting
      Sensor Condition N Avail Make the front sensors available when the shift lever is in N.

      Not Avail or Avail


      • Not Avail: Not Available

      • Avail: Available
      Reverse Range Front Sensor F Change the operation setting for the front sensors when the shift lever is in R.

      F or F Stop


      • F: Front sensors are available

      • F Stop: Front sensors are not available
      Non P/R Range Rear Sensor R Stop Change the operation setting for the rear sensors when the shift lever is in any position except P or R.

      R, Rcrn or R Stop


      • R: All rear sensors are available

      • Rcrn: Rear corner sensors are available

      • R Stop: All rear sensors are not available
      Display
      Display Default Content Setting
      Display Mode All The display mode setting (when the Lexus parking assist-sensor system is normal). All or Undisp

  2. CUSTOMIZE PARAMETERS (On Multi-display)

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Turn the power switch on (IG).

    2. Turn the Lexus parking assist-sensor system on.

    3. Select the following menus: Setup / Vehicle / LEXUS park assist.

    4. Select the setting by referring to the table below.

      Display Default Content Setting
      Alert volume 3 Change the buzzer volume setting.

      1, 2, 3, 4 or 5


      • 1: Low volume

      • 2: Medium low volume

      • 3: Medium volume

      • 4: Medium high volume

      • 5: High volume
      Display On The display mode setting (when the Lexus parking assist-sensor system is normal). On or Off
      Distance Wide Set the buzzer activation range for the rear center sensors.

      Narrow or Wide


      • Narrow: 600 mm (23.62 in.)

      • Wide: 1500 mm (59.06 in.)