REMOTE TOUCH INSTALLATION


  1. INSTALL REMOTE TOUCH


    1. A01NDEW

      Engage the 6 claws to install the remote touch.

  2. INSTALL CONSOLE CUP HOLDER BOX SUB-ASSEMBLY


    1. A01NHQG

      Install the console cup holder box sub-assembly with the 5 screws <F>.

  3. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY


    1. Engage the clamp.

    2. Connect each connector.

    3. A01NEE4

      Engage the 3 claws and 3 clips.

    4. w/o Seat Heater System:


      1. Connect the connector to the console box hole cover.

    5. A01NDQX

      w/ Seat Heater System:


      1. Engage the 4 claws to install the seat heater switch assembly.

      2. Connect the connector.

    6. A01NHPA

      Engage the 4 claws and 4 clips to install the upper console panel sub-assembly.

  4. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY


    1. A01NH7J

      Turn the shift lever knob sub-assembly clockwise to install the shift lever knob sub-assembly.

  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  6. INSTALL REAR DECK FLOOR BOX


    1. A01NDSY

      Install the rear deck floor box with the 3 clips.

  7. INSPECT SRS WARNING LIGHT


    1. Inspect the SRS warning light Click here.